If the millimeter wave radar sensor assembly has been struck or dropped, replace the millimeter wave radar sensor assembly with a new one.
88211B
1.INSTALL MILLIMETER WAVE RADAR SENSOR ASSEMBLY
|
Bolt |
|
Screw |
Attach the guide.
Temporarily install the millimeter wave radar sensor assembly with the 2 bolts and screw.
Tighten the 2 bolts and screw in the order shown in the illustration.
Attach the connector.
16681A
2.INSTALL RADIATOR UPPER AIR GUIDE PLATE
53510
3.INSTALL HOOD LOCK ASSEMBLY
17751
4.INSTALL NO. 1 INLET AIR CLEANER (for Gasoline Model)
53301
5.INSPECT HOOD SUB-ASSEMBLY
6.ADJUST MILLIMETER WAVE RADAR SENSOR
When the millimeter wave radar sensor assembly is replaced with a new one, adjustment of the radar sensor beam axis must be performed.
Millimeter wave radar sensor assembly learning can be performed by using either Target Adjustment (Triangle Target) or Target Adjustment (Flat Surface Target) or Driving Adjustment.
Target Adjustment (Triangle Target):
Target Adjustment (Flat Surface Target):