K121F CVT  SHIFT STROKE SENSOR  INSTALLATION  

89419B 1.INSTALL SHIFT STROKE SENSOR

a.

Coat the O-ring of the shift stroke sensor with Toyota Genuine CVT fluid FE.

NOTICE:

If reusing the shift stroke sensor, check that the O-ring is not damaged.

b.

Install the shift stroke sensor to the transaxle case sub-assembly with the bolt.

Torque:

5.4 N*m (55 kgf*cm, 48 in.*lbf)

NOTICE:

Be careful not to damage the O-ring.

c.

Connect the shift stroke sensor connector.

74404B 2.INSTALL BATTERY CLAMP SUB-ASSEMBLY

89661 3.INSTALL ECM

4.INSTALL AIR CLEANER ASSEMBLY WITH AIR CLEANER HOSE

17751 5.INSTALL NO. 1 INLET AIR CLEANER

12601B 6.INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY

7.INSTALL BATTERY

8.INSPECT CONTINUOUSLY VARIABLE TRANSAXLE FLUID

9.CHECK DATA LIST