RM36D0EC _52 Drivetrain _138817 K121F CVT _0584982 REVOLUTION SENSOR(NT SENSOR) A

K121F CVT REVOLUTION SENSOR(NT SENSOR) INSTALLATION

PROCEDURE

Hide Display 89413N 1.INSTALL TRANSMISSION REVOLUTION SENSOR (NT)

a.

Coat a new O-ring with Toyota Genuine CVT fluid FE and install it to the transmission revolution sensor (NT).

NOTICE:: Ensure that the O-ring is not twisted.

b.

Install the transmission revolution sensor (NT) to the rear transaxle case sub-assembly with the bolt.

Torque:: 5.4 N*m (55 kgf*cm, 48 in.*lbf)

NOTICE:: Be careful not to damage the O-ring.

c.

Connect the transmission revolution sensor (NT) connector.

Hide Display 2.INSPECT CONTINUOUSLY VARIABLE TRANSAXLE FLUID

Hide Display 53737D 3.INSTALL FRONT FENDER APRON SEAL LH

Click hereEngine / Hybrid System>M20D-FKS (ENGINE MECHANICAL)>ENGINE ASSEMBLY>INSTALLATION202304,999999,_51,_083059,_0403046,RM1000000029XAF_01_0290,

Hide Display 51420 4.INSTALL NO. 2 ENGINE UNDER COVER ASSEMBLY

Click hereEngine / Hybrid System>M20D-FKS (ENGINE MECHANICAL)>ENGINE ASSEMBLY>INSTALLATION202304,999999,_51,_083059,_0403046,RM1000000029XAF_01_0292,

Hide Display 51441 5.INSTALL NO. 1 ENGINE UNDER COVER

Click hereEngine / Hybrid System>M20D-FKS (ENGINE MECHANICAL)>ENGINE ASSEMBLY>INSTALLATION202304,999999,_51,_083059,_0403046,RM1000000029XAF_01_0293,

Hide Display 53896B 6.INSTALL FRONT FENDER FRONT SPLASH SHIELD LH

Click hereEngine / Hybrid System>M20D-FKS (ENGINE MECHANICAL)>ENGINE ASSEMBLY>INSTALLATION202304,999999,_51,_083059,_0403046,RM1000000029XAF_01_0330,

Hide Display 53895B 7.INSTALL FRONT FENDER FRONT SPLASH SHIELD RH

Click hereEngine / Hybrid System>M20D-FKS (ENGINE MECHANICAL)>ENGINE ASSEMBLY>INSTALLATION202304,999999,_51,_083059,_0403046,RM1000000029XAF_01_0331,

Hide Display 8.CHECK DATA LIST

Click hereDrivetrain>K121F (CVT)>CONTINUOUSLY VARIABLE TRANSAXLE SYSTEM>DATA LIST / ACTIVE TEST202304,202405,_52,_138817,_0596468,RM100000002AWSW,202405,202409,_52,_138817,_0596468,RM100000002JJ5T,202409,999999,_52,_138817,_0596468,RM100000002NRBS,