RM36D0EC _52 Drivetrain _138176 K121 CVT _0579402 OIL PRESSURE SENSOR A

K121 CVT OIL PRESSURE SENSOR INSTALLATION

PROCEDURE

Hide Display 89637K 1.INSTALL OIL PRESSURE SENSOR

a.

C395505

Coat the O-ring of the oil pressure sensor with Toyota Genuine CVT fluid FE.

NOTICE:: If reusing the oil pressure sensor, check that the O-ring is not damaged.

b.

Using a 27 mm deep socket wrench, install the oil pressure sensor to the rear transaxle case sub-assembly.

Torque:: 20.6 N*m (210 kgf*cm, 15 ft.*lbf)

NOTICE:: Be careful not to damage the O-ring.

c.

Connect the oil pressure sensor connector.

Hide Display 2.INSPECT CONTINUOUSLY VARIABLE TRANSAXLE FLUID

Hide Display 53737D 3.INSTALL FRONT FENDER APRON SEAL LH

Click hereEngine / Hybrid System>M20D-FKS (ENGINE MECHANICAL)>ENGINE ASSEMBLY>INSTALLATION202304,999999,_51,_083059,_0403046,RM1000000029XAF_01_0290,

Hide Display 51420 4.INSTALL NO. 2 ENGINE UNDER COVER ASSEMBLY

Click hereEngine / Hybrid System>M20D-FKS (ENGINE MECHANICAL)>ENGINE ASSEMBLY>INSTALLATION202304,999999,_51,_083059,_0403046,RM1000000029XAF_01_0292,

Hide Display 51441 5.INSTALL NO. 1 ENGINE UNDER COVER

Click hereEngine / Hybrid System>M20D-FKS (ENGINE MECHANICAL)>ENGINE ASSEMBLY>INSTALLATION202304,999999,_51,_083059,_0403046,RM1000000029XAF_01_0293,

Hide Display 53896B 6.INSTALL FRONT FENDER FRONT SPLASH SHIELD LH

Click hereEngine / Hybrid System>M20D-FKS (ENGINE MECHANICAL)>ENGINE ASSEMBLY>INSTALLATION202304,999999,_51,_083059,_0403046,RM1000000029XAF_01_0330,

Hide Display 53895B 7.INSTALL FRONT FENDER FRONT SPLASH SHIELD RH

Click hereEngine / Hybrid System>M20D-FKS (ENGINE MECHANICAL)>ENGINE ASSEMBLY>INSTALLATION202304,999999,_51,_083059,_0403046,RM1000000029XAF_01_0331,

Hide Display 8.RESET MEMORY

Click hereDrivetrain>K121 (CVT)>CONTINUOUSLY VARIABLE TRANSAXLE SYSTEM>INITIALIZATION202304,202405,_52,_138176,_0584691,RM1000000029HF7,202405,202409,_52,_138176,_0584691,RM100000002JGMX,202409,999999,_52,_138176,_0584691,RM100000002NRHB,