88625
1.INSTALL NO. 1 COOLER THERMISTOR
Install the No. 1 cooler thermistor as shown in the illustration.
Be sure to insert the No. 1 cooler thermistor only once because reinserting it into the same position will not allow it to be firmly secured.
When reusing the No. 1 cooler evaporator sub-assembly, insert the sensor part of the No. 1 cooler thermistor one row from the row that had been used previously (X in the illustration).
After inserting the No. 1 cooler thermistor, do not apply excessive force to the wire.
Directly insert the No. 1 cooler thermistor until the edge of the plastic case "a" comes into contact with the No. 1 cooler evaporator sub-assembly "b".
| Part | Length |
|---|---|
| A | 45 to 55 mm (1.77 to 2.17 in.) |
| B | 61.1 mm (2.41 in.) (9 Fins) |
| C | 23 to 27 mm (0.906 to 1.06 in.) |
| D | 54.4 mm (2.14 in.) (8 Fins) |
| *A | for A25B-FXS, A25D-FXS | *B | for M20C-FKS, M20D-FKS |
| *C | for A25F-FXS | - | - |
| *a | Fixed Part | *b | Sensor Part |
| *c | Production date from 2021/08 | - | - |
88501
2.INSTALL NO. 1 COOLER EVAPORATOR SUB-ASSEMBLY
Production date from 2021/08
88515
3.INSTALL COOLER EXPANSION VALVE
Production date from 2021/08
88899L
4.INSTALL COOLING UNIT PARTS
Production date from 2021/08
87107A
5.INSTALL HEATER RADIATOR UNIT SUB-ASSEMBLY
Production date from 2021/08
87124B
6.INSTALL HEATER CLAMP
Production date from 2021/08
88897M
7.INSTALL HEATER PIPE GROMMET
Production date from 2021/08
82210K
8.INSTALL AIR CONDITIONING HARNESS ASSEMBLY
Production date from 2021/08
87130D
9.INSTALL BLOWER ASSEMBLY