RM36D0EC _V1 General _083136 MAINTENANCE _0418196 M20C-FKS SPARK PLUG A

MAINTENANCE M20C-FKS SPARK PLUG REMOVAL

CAUTION / NOTICE / HINT

The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed and installed, or replaced during spark plug removal/installation are shown below.

Necessary Procedures After Parts Removed/Installed/Replaced
Replaced Part or Performed Procedure	Necessary Procedure	Effect/Inoperative Function when Necessary Procedure not Performed	Link
· Replacement of ignition coil assembly · Replacement of spark plug	Inspection after repair	· Poor idle, etc. · Engine start function, etc.	(201910,202304,_51,_083058,_0401834,RM100000001JDW3,202304,202409,_51,_083058,_0401834,RM1000000029C6V,202409,999999,_51,_083058,_0401834,RM100000002NA8M,)

NOTICE:: This procedure includes the removal of small-head bolts. Refer to Small-Head Bolts of Basic Repair Hint to identify the small-head bolts.; Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION201910,999999,_V1,_083040,_0402303,RM100000001JHCH,

PROCEDURE

Hide Display 12601B 1.REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY

Click hereEngine / Hybrid System>M20C-FKS (ENGINE MECHANICAL)>ENGINE ASSEMBLY>REMOVAL202004,202304,_51,_087037,_0417212,RM100000001MD0V_01_0288,202304,202405,_51,_087037,_0417212,RM1000000029X9A_01_0288,202405,999999,_51,_087037,_0417212,RM100000002JNRH_01_0288,

Hide Display 19500 2.REMOVE IGNITION COIL ASSEMBLY

Click hereEngine / Hybrid System>M20C-FKS (ENGINE CONTROL)>IGNITION COIL AND SPARK PLUG>REMOVAL202004,999999,_51,_087036,_0418145,RM100000001MINJ_01_0003,

Hide Display 19100P 3.REMOVE SPARK PLUG

Remove the 4 spark plugs from the cylinder head sub-assembly.

NOTICE:: If a spark plug has been struck or dropped, replace it.