RM36D0EC _57 Power Source / Network _087045 M20C-FKS BATTERY / CHARGING _0418150 CHARGING SYSTEM Y

M20C-FKS BATTERY / CHARGING  CHARGING SYSTEM  HOW TO PROCEED WITH TROUBLESHOOTING  


CAUTION / NOTICE / HINT

HINT:

*: Use the GTS.


PROCEDURE

1.VEHICLE BROUGHT TO WORKSHOP
Result:
Proceed to
NEXT



NEXT

2.CUSTOMER PROBLEM ANALYSIS
2.CUSTOMER PROBLEM ANALYSIS
HINT:
·

In troubleshooting, confirm that the problem symptoms have been accurately identified. Preconceptions should be discarded in order to make an accurate judgment. To clearly understand what the problem symptoms are, it is extremely important to ask the customer about the problem and the conditions at the time the malfunction occurred.

·

Gather as much information as possible for reference. Past problems that seem unrelated may also help in some cases.

·

The following 5 items are important points for problem analysis:

What Vehicle model, system name
When Date, time, occurrence frequency
Where Road conditions
Under what conditions? Running conditions, driving conditions, weather conditions
How did it happen? Problem symptoms



Result:
Proceed to
NEXT



NEXT

3.INSPECT BATTERY VOLTAGE
3.INSPECT BATTERY VOLTAGE
a.

Measure the battery voltage.

Standard voltage:

11 to 14 V



If the voltage is below 11 V, recharge or replace the battery before proceeding to the next step.

Result:
Proceed to
NEXT



NEXT

4.INSPECT COMMUNICATION FUNCTION OF CAN COMMUNICATION SYSTEM*
6.REFER TO PROBLEM SYMPTOMS TABLE
HINT:

Refer to Problem Symptoms Table.

Click herePower Source / Network>M20C-FKS (BATTERY / CHARGING)>CHARGING SYSTEM>PROBLEM SYMPTOMS TABLE


Result:
Result Proceed to
Malfunctioning parts are not confirmed. A
Malfunctioning parts are confirmed. B



A

7.OVERALL ANALYSIS AND TROUBLESHOOTING*

B

12.ADJUST AND/OR REPAIR
7.OVERALL ANALYSIS AND TROUBLESHOOTING*

A

8.CHECK ECM CIRCUIT

B

12.ADJUST AND/OR REPAIR
8.CHECK ECM CIRCUIT

OK

9.CHECK FOR INTERMITTENT PROBLEMS

NG

12.ADJUST AND/OR REPAIR
9.CHECK FOR INTERMITTENT PROBLEMS

NEXT

10.CONDUCT PARTS INSPECTION
10.CONDUCT PARTS INSPECTION
Result:
Proceed to
NEXT



NEXT

11.IDENTIFY PROBLEM
11.IDENTIFY PROBLEM
Result:
Proceed to
NEXT



NEXT

12.ADJUST AND/OR REPAIR
12.ADJUST AND/OR REPAIR
Result:
Proceed to
NEXT



NEXT

13.CONDUCT CONFIRMATION TEST
13.CONDUCT CONFIRMATION TEST
Result:
Proceed to
NEXT



NEXT

END