RM36D0EC _51 Engine / Hybrid System _087036 M20C-FKS ENGINE CONTROL _0418145 IGNITION COIL AND SPARK PLUG A

M20C-FKS ENGINE CONTROL IGNITION COIL AND SPARK PLUG REMOVAL

CAUTION / NOTICE / HINT

The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed and installed, or replaced during ignition coil assembly or spark plug removal/installation are shown below.

Necessary Procedures After Parts Removed/Installed/Replaced
Replaced Part or Performed Procedure	Necessary Procedure	Effect/Inoperative Function when Necessary Procedure not Performed	Link
· Replacement of ignition coil assembly · Replacement of spark plug	Inspection after repair	· Poor idle, etc. · Engine start function, etc.	(202004,202304,_51,_087036,_0418131,RM100000001MIHP,202304,202405,_51,_087036,_0418131,RM1000000029CMT,202405,999999,_51,_087036,_0418131,RM100000002IF8T,)

NOTICE:: This procedure includes the removal of small-head bolts. Refer to Small-Head Bolts of Basic Repair Hint to identify the small-head bolts.; Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION201910,999999,_V1,_083040,_0402303,RM100000001JHCH,

PROCEDURE

Hide Display 12601B 1.REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY

Click hereEngine / Hybrid System>M20C-FKS (ENGINE MECHANICAL)>ENGINE ASSEMBLY>REMOVAL202004,202304,_51,_087037,_0417212,RM100000001MD0V_01_0288,202304,202405,_51,_087037,_0417212,RM1000000029X9A_01_0288,202405,999999,_51,_087037,_0417212,RM100000002JNRH_01_0288,

Hide Display 19500 2.REMOVE IGNITION COIL ASSEMBLY

Disconnect the 4 ignition coil assembly connectors.

Remove the 4 bolts and 4 ignition coil assemblies from the cylinder head cover sub-assembly.

NOTICE:: If an ignition coil assembly has been struck or dropped, replace it.

Hide Display 19100P 3.REMOVE SPARK PLUG

Click hereGeneral>MAINTENANCE>M20C-FKS SPARK PLUG>REMOVAL202004,999999,_V1,_083136,_0418196,RM100000001MJ29_02_0003,