RM36D0EC _51 Engine / Hybrid System _087036 M20C-FKS ENGINE CONTROL _0418142 MASS AIR FLOW METER A

M20C-FKS ENGINE CONTROL MASS AIR FLOW METER REMOVAL

CAUTION / NOTICE / HINT

The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed and installed, or replaced during mass air flow meter sub-assembly removal/installation are shown below.

Necessary Procedures After Parts Removed/Installed/Replaced
Replaced Part or Performed Procedure	Necessary Procedure	Effect/Inoperative Function when Necessary Procedure not Performed	Link
Replacement of mass air flow meter sub-assembly	Inspection after repair	· Poor idle, etc. · Engine start function, etc.	(202004,202304,_51,_087036,_0418131,RM100000001MIHP,202304,202405,_51,_087036,_0418131,RM1000000029CMT,202405,999999,_51,_087036,_0418131,RM100000002IF8T,)

PROCEDURE

Hide Display 22204 1.REMOVE MASS AIR FLOW METER SUB-ASSEMBLY

Disconnect the mass air flow meter sub-assembly connector.

Remove the 2 screws and mass air flow meter sub-assembly from the air cleaner cap sub-assembly.

NOTICE:: If the mass air flow meter sub-assembly has been struck or dropped, replace it.