RM36D0EC _59 Vehicle Exterior _083093 DOOR / HATCH _0403691 BACK DOOR N

DOOR / HATCH  BACK DOOR  ADJUSTMENT  


CAUTION / NOTICE / HINT

HINT:
B276679C03
0.621,1.754 0.818,1.944 0.197,0.19 10 *1 2.535,1.754 2.732,1.944 0.197,0.19 10 *2
*1 Centering Bolt
*2 Standard Bolt


Centering bolts are used to mount the door hinge to the vehicle body and door. The door cannot be adjusted with the centering bolts on. Substitute the centering bolts for standard bolts when making adjustments.


PROCEDURE

Hide 67005 1.INSPECT BACK DOOR PANEL SUB-ASSEMBLY

a.

Check that the clearance measurements of areas A to H are within the standard ranges.

B528019N01
1.49,0.25 1.646,0.448 0.156,0.198 10 false A 1.063,0.854 1.219,1.052 0.156,0.198 10 false B 3.719,0.198 3.875,0.396 0.156,0.198 10 false C 3.292,0.76 3.448,0.958 0.156,0.198 10 false D 5.344,1.26 5.5,1.458 0.156,0.198 10 false E 5.896,2.458 6.052,2.656 0.156,0.198 10 false F 5.781,3.729 5.938,3.927 0.156,0.198 10 false G 4.896,4.281 5.052,4.479 0.156,0.198 10 false H

Standard Clearance
Area Measurement Area Measurement
A 5.95 to 9.95 mm (0.234 to 0.392 in.) B -1.15 to 2.85 mm (-0.0453 to 0.1122 in.)
C 5.95 to 9.95 mm (0.234 to 0.392 in.) D -1.15 to 2.85 mm (-0.0453 to 0.1122 in.)
E 3.35 to 7.35 mm (0.132 to 0.290 in.) F 2.5 to 7.5 mm (0.0984 to 0.2953 in.)
G 3.35 to 7.35 mm (0.132 to 0.290 in.) H 4.55 to 9.55 mm (0.179 to 0.376 in.)


Hide 67005 4.ADJUST BACK DOOR PANEL SUB-ASSEMBLY

a.
B528020

Before adjusting the upper end of the back door up and down or left and right, loosen the bolts.


b.

Tighten the hinge bolts on the body after the adjustment.

Torque:
19.5 N*m (199 kgf*cm, 14 ft.*lbf)


c.
B528021

Using a T40 "TORX" socket wrench, adjust the striker position by slightly loosening the striker mounting screws and hitting the striker with a brass bar and a hammer.


d.

Using a T40 "TORX" socket wrench, tighten the striker mounting screws after the adjustment.

Torque:
23 N*m (235 kgf*cm, 17 ft.*lbf)