RM36D0EC _52 Drivetrain _083070 DRIVE SHAFT / PROPELLER SHAFT _0403348 FRONT DRIVE SHAFT ASSEMBLY(for 2WD) G

DRIVE SHAFT / PROPELLER SHAFT  FRONT DRIVE SHAFT ASSEMBLY(for 2WD)  INSPECTION  


CAUTION / NOTICE / HINT

NOTICE:
·

When using a vise, place aluminum plates between the part and vise.

·

When using a vise, do not overtighten it.



PROCEDURE

Hide 1.INSPECT FRONT DRIVE SHAFT ASSEMBLY

a.
C211744

Check that there is no excessive play in the radial direction of the outboard joint.


b.

Check that the inboard joint slides smoothly in the thrust direction.


c.

Check that there is no excessive play in the radial direction of the inboard joint.


d.

Check the boots for damage.


e.
C406984C01
0.125,0.125 0.438,0.281 0.313,0.156 10 false *A 0.167,1.333 0.479,1.49 0.313,0.156 10 false *B 1.542,0.885 1.74,1.083 0.198,0.198 10 false A 1.604,2.833 1.802,3.031 0.198,0.198 10 false A 0.646,0.604 0.844,0.802 0.198,0.198 10 false B 0.219,2.625 0.417,2.823 0.198,0.198 10 false B
*A for LH Side
*B for RH Side


Check whether the drive shaft dimension (A) and (B) are within specification.

NOTICE:

Keep the drive shaft assembly level during inspection.


i.

for Gasoline model:

Dimension (A):
for LH Side 603.2 mm (1.98 ft.)
for RH Side 902.0 mm (2.96 ft.)


Dimension (B):
for LH Side 88.2 mm (3.47 in.)
for RH Side 83.7 to 84.7 mm (3.30 to 3.33 in.)



ii.

for HV model:

Dimension (A):
for LH Side 607.6 mm (1.99 ft.)
for RH Side 906.4 mm (2.97 ft.)


Dimension (B):
for LH Side 88.2 mm (3.47 in.)
for RH Side 83.7 to 84.7 mm (3.30 to 3.33 in.)