BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS  VSC OFF SWITCH  INSPECTION  

2.75,1.854 2.573,1.854 2.573,1.854 2.083,1.323 true 1.448,1.333 0.917,1.823 0.917,1.823 0.76,1.823 true 0.104,0.104 0.365,0.313 0.26,0.208 10 false *a 0.583,1.719 0.958,1.917 0.375,0.198 10 false + 2.844,1.76 3.063,1.917 0.219,0.156 10 false E

*a	Component without harness connected (VSC OFF Switch)

Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Tester Connection	Switch Condition	Specified Condition
5 (+) - 2 (E)	Pushed	Below 1 Ω
	Not pushed	10 kΩ or higher

If the result is not as specified, replace the VSC OFF switch.

0.698,1.667 0.865,1.667 0.865,1.667 1.25,1.333 true 2.823,1.635 2.635,1.635 2.635,1.635 2.302,1.313 true 0.094,0.115 0.396,0.323 0.302,0.208 10 false *a 0.354,1.552 0.76,1.74 0.406,0.188 10 false ILL+ 2.906,1.542 3.292,1.74 0.385,0.198 10 false ILL-

*a	Component without harness connected (VSC OFF Switch)

Apply battery voltage between the terminals of the switch, and check the illumination condition of the VSC OFF switch.

OK:

Measurement Condition	Specified Condition
Battery positive (+) → 6 (ILL+) Battery negative (-) → 1 (ILL-)	Illuminates

If the result is not as specified, replace the VSC OFF switch.