RM36D0EC _54 Brake _083077 BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS _0403132 FRONT SPEED SENSOR A

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS  FRONT SPEED SENSOR  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

The following procedure is for the LH side.

·

The front speed sensor rotor is a component of the front axle hub sub-assembly. If the front speed sensor rotor is malfunctioning, replace the front axle hub sub-assembly.



PROCEDURE

Hide 89543 1.INSTALL FRONT SPEED SENSOR LH

NOTICE:

Do not twist the front speed sensor wire harness when installing it.


a.

Install the front speed sensor LH to the steering knuckle with the bolt.

Torque:
8.5 N*m (87 kgf*cm, 75 in.*lbf)

NOTICE:
·

Keep the tip of the front speed sensor and installation hole free of foreign matter.

·

Firmly insert the front speed sensor body into the steering knuckle before tightening the bolt.

·

After installing the front speed sensor to the steering knuckle, make sure that there is no clearance between the front speed sensor stay and steering knuckle. Also make sure that no foreign matter is stuck between the parts.




b.

Engage the clamp to the front shock absorber assembly.


c.
C409039

Engage the 2 claws of the front speed sensor clamp to the front shock absorber assembly.


d.
C408199N01
2.354,1.104 2.51,1.302 0.156,0.198 10 true A 0.583,1.135 0.74,1.333 0.156,0.198 10 true B

Install the front flexible hose to the front shock absorber assembly with the bolt (A).

Torque:
29 N*m (296 kgf*cm, 21 ft.*lbf)


e.

Install the front speed sensor clamp with the bolt (B).

Torque:
8.5 N*m (87 kgf*cm, 75 in.*lbf)


f.

Engage the clamp to the vehicle body.


g.

Connect the front speed sensor connector.


h.

Return the front fender liner to its original position.


Hide 53876A 2.INSTALL FRONT FENDER LINER LH

a.

Install the front fender liner LH with the 7 clips and new grommet.


b.

Install the 5 screws.