☰ Toyota Wildlander☰ فهرستAudio / Visual / Telematics › PARK ASSIST / MONITORING › PANORAMIC VIEW MONITOR SWITCH
RM36D0EC
_56
Audio / Visual / Telematics
_083082
PARK ASSIST / MONITORING
_0403110
PANORAMIC VIEW MONITOR SWITCH
G
PARK ASSIST / MONITORING PANORAMIC VIEW MONITOR SWITCH INSPECTION
PROCEDURE
84721B
1.INSPECT PANORAMIC VIEW MONITOR SWITCH
a.
1.448,2.917 1.448,2.583
true
1.938,2.917 1.938,2.583
true
0.083,0.083 0.396,0.281
0.313,0.198
10
false
*a
1.417,2.938 1.573,3.135
0.156,0.198
10
false
D
1.917,2.927 2.073,3.125
0.156,0.198
10
false
E
| *a | Component without harness connected
(Panoramic View Monitor Switch) |
Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection Switch Condition Specified Condition If the result is not as specified, replace the panoramic view monitor switch.
5 (D) - 2 (E) Panoramic view monitor switch on (not protruding) Below 1 Ω Panoramic view monitor switch off (protruding) 10 kΩ or higher
b.
1.281,2.917 1.281,2.583
true
2.104,2.917 2.104,2.583
true
1.198,2.927 1.531,3.094
0.333,0.167
10
false
ILL+
2.031,2.927 2.365,3.094
0.333,0.167
10
false
ILL-
0.083,0.083 0.396,0.281
0.313,0.198
10
false
*a
| *a | Component without harness connected
(Panoramic View Monitor Switch) |
Check that the switch illuminates.
i.
Apply auxiliary battery voltage to the panoramic view monitor switch and check that the switch illuminates.
- OK:
Auxiliary Battery Connection Specified Condition If the result is not as specified, replace the panoramic view monitor switch.
Auxiliary Battery positive (+) → Terminal 6 (ILL+)
Auxiliary Battery negative (-) → Terminal 1 (ILL-)Illuminates