This DTC is stored when a door control transmitter assembly with an incomplete key ID code is inserted into the ignition key cylinder.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | Note |
|---|---|---|---|---|
| B2794 | Unmatched Encryption Code | A door control transmitter assembly with an incomplete key ID code is inserted into the ignition key cylinder (1 trip detection logic*). | Door control transmitter assembly | DTC Output Confirmation Operation:
Insert the door control transmitter assembly into the ignition key cylinder. |
*: Only output while a malfunction is present.
| Vehicle Condition when Malfunction Detected | Fail-safe Operation when Malfunction Detected |
|---|---|
| Engine cannot be started | - |
| DTC No. | Data List and Active Test |
|---|---|
| B2794 | - |
Before replacing the door control transmitter assembly, refer to the Service Bulletin.
After repair, confirm that no DTCs are output by performing "DTC Output Confirmation Operation".
Register the door control transmitter assembly which caused the DTC to be stored.
Refer to Service Bulletin.
| Proceed to |
|---|
| NEXT |
NEXT
Connect the GTS to the DLC3.
Turn the ignition switch to ON.
Enter the following menus: Body Electrical / Immobiliser / Trouble Codes.
Clear the DTCs.
| Proceed to |
|---|
| NEXT |
NEXT
Perform "DTC Output Confirmation Operation" procedure.
Enter the following menus: Body Electrical / Immobiliser / Trouble Codes.
Check for DTCs.
| Result | Proceed to |
|---|---|
| B2794 is not output | A |
| B2794 is output | B |
A
B