RM36D0EC _55 Steering _083085 STEERING GEAR / LINKAGE _0402713 STEERING GEAR A

STEERING GEAR / LINKAGE  STEERING GEAR  DISASSEMBLY  


PROCEDURE

Hide 45535B 1.REMOVE STEERING RACK BOOT CLIP (for LH Side)

a.

Using pliers, remove the steering rack boot clip.


Hide 45535B 2.REMOVE STEERING RACK BOOT CLIP (for RH Side)

HINT:

Perform the same procedure as for the LH side.


Hide 45535D 3.REMOVE NO. 1 STEERING RACK BOOT CLAMP (for LH Side)

a.
C404147

Using a screwdriver, remove the No. 2 steering rack boot clamp.

NOTICE:

Be careful not to damage the No. 2 steering rack boot.



Hide 45535D 4.REMOVE NO. 1 STEERING RACK BOOT CLAMP (for RH Side)

HINT:

Perform the same procedure as for the LH side.


Hide 45536 5.REMOVE NO. 2 STEERING RACK BOOT

a.

Remove the No. 2 steering rack boot.

NOTICE:
·

Check that there is no water, foreign matter or rust inside of the removed No. 2 steering rack boot.

·

If there is no water, foreign matter or rust inside of the No. 2 steering rack boot, pull out the rack bar and check for water, foreign matter or rust.

·

If water or foreign matter in either part, replace them with a new rack and pinion power steering gear assembly.

·

In order to avoid water or foreign matter from adhering to the parts, do not touch the parts unless working in a dust-free, indoors environment.




Hide 45535 6.REMOVE NO. 1 STEERING RACK BOOT

HINT:

Perform the same procedure as for the No. 2 steering rack boot.