RM36D0EC _56 Audio / Visual / Telematics _083087 TELEMATICS _0402655 TELEMATICS SYSTEM U

TELEMATICS  TELEMATICS SYSTEM  DATA LIST / ACTIVE TEST  


DATA LIST


NOTICE:

In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.


HINT:

Using the GTS to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.


a.

Connect the GTS to the DLC3.


b.

Turn the ignition switch to ON.


c.

Turn the GTS on.


d.

Enter the following menus: Body Electrical / Telematics / Data List.


e.

According to the display on the GTS, read the "Data List".

Body Electrical > Telematics > Data List
Tester Display Measurement Item Range Normal Condition Diagnostic Note
Total Distance Traveled Total distance traveled Min.: 0, Max.: 16777215 - -
Total Distance Traveled - Unit Total distance traveled unit -, km or mile - -
IMEI IMEI of telematics transceiver 15 digits - -
Software Version High Software version of telematics transceiver (10 digits from left) 10 digits - -
Software Version Low Software version of telematics transceiver (10 digits from right) 10 digits - -
MSISDN MSISDN of telematics transceiver 16 digits - -
PLMN(MCC) MCC of telematics transceiver 3 digits - -
PLMN(MNC) MNC of telematics transceiver 3 digits - -
ICCID(High) ICCID of telematics transceiver (10 digits from left) 10 digits - -
ICCID(Low) ICCID of telematics transceiver (10 digits from right) 10 digits - -
Communication Status with TSC Communication status with TOYOTA Connect Center Incomplete or Complete Complete -
Telematics Activation Status DCM activation status Shipping or Active Shipping: Not activated
Active: Activated 		-
Remote Vehicle Tracking Display "Remote Vehicle Tracking" function enabled/disabled status Disable or Enable Disable: Following function disabled
Enable: Following function enabled 		-
Brand TOYOTA Bland name No or Yes No: Except TOYOTA Brand
YES: TOYOTA Brand 		-
OTA Reprogramming Display "OTA Reprogramming" function enabled/disabled status Disable or Enable Disable: Following function disabled
Enable: Following function enabled 		-
HELPNET Function Display "Helpnet" function enabled/disabled status Disable or Enable Disable: Following function disabled
Enable: Following function enabled 		-
Information Collection via Ethernet Display "Information Connection via Ethernet" function enabled/disabled status Disable or Enable Disable: Following function disabled
Enable: Following function enabled 		-
Information Collection via CAN Display "Information Collection via CAN" function enabled/disabled status Disable or Enable Disable: Following function disabled
Enable: Following function enabled 		-
Remote Service Function Display "Remote Service" function enabled/disabled status Disable or Enable Disable: Following function disabled
Enable: Following function enabled 		-
Vehicle State Notification Display "Vehicle State Notification" function enabled/disabled status Disable or Enable Disable: Following function disabled
Enable: Following function enabled 		-
Stolen Vehicle Tracking Display "Stolen Vehicle Tracking" function enabled/disabled status Disable or Enable Disable: Following function disabled
Enable: Following function enabled 		-
IP Remote Detected DTC Display "IP Remote Detected DTC" function enabled/disabled status Disable or Enable Disable: Following function disabled
Enable: Following function enabled 		-
IP Remote FFD Display "IP Remote FFD" function enabled/disabled status Disable or Enable Disable: Following function disabled
Enable: Following function enabled 		-
IP Remote Monitoring Display "IP Remote Monitoring" function enabled/disabled status Disable or Enable Disable: Following function disabled
Enable: Following function enabled 		-
Remote Warning Display "Remote Warning" function enabled/disabled status Disable or Enable Disable: Following function disabled
Enable: Following function enabled 		-
Remote Detected DTC Display "Remote Detected DTC" function enabled/disabled status Disable or Enable Disable: Following function disabled
Enable: Following function enabled 		-
Remote FFD Display "Remote FFD" function enabled/disabled status Disable or Enable Disable: Following function disabled
Enable: Following function enabled 		-
Remote Detect DTC Display "Remote Detect DTC" function enabled/disabled status Disable or Enable Disable: Following function disabled
Enable: Following function enabled 		-
Remote Confirmation Display "Remote Confirmation" function enabled/disabled status Disable or Enable Disable: Following function disabled
Enable: Following function enabled 		-
Remote Precaution Display "Remote Precaution" function enabled/disabled status Disable or Enable Disable: Following function disabled
Enable: Following function enabled 		-
Remote Monitoring Display "Remote Monitoring" function enabled/disabled status Disable or Enable Disable: Following function disabled
Enable: Following function enabled 		-
Remote Diagnostics Recorder Display "Remote Diagnostics Recorder" function enabled/disabled status Disable or Enable Disable: Following function disabled
Enable: Following function enabled 		-
Remote Operation Display "Remote Operation" function enabled/disabled status Disable or Enable Disable: Following function disabled
Enable: Following function enabled 		-
Alarm Notification Display "Alarm Notification" function enabled/disabled status Disable or Enable Disable: Following function disabled
Enable: Following function enabled 		-
Remote Immobilizer Display "Remote Immobilizer" function enabled/disabled status Disable or Enable Disable: Following function disabled
Enable: Following function enabled 		-
Remote Vehicle Location Display "Remote Vehicle Location" function enabled/disabled status Disable or Enable Disable: Following function disabled
Enable: Following function enabled 		-
Remote Navigation Display Display "Remote Navigation Display" function enabled/disabled status Disable or Enable Disable: Following function disabled
Enable: Following function enabled 		-
Remote Vehicle Control History Display "Remote Vehicle Control History" function enabled/disabled status Disable or Enable Disable: Following function disabled
Enable: Following function enabled 		-
Maintenance Message Display "Maintenance Message" function enabled/disabled status Disable or Enable Disable: Following function disabled
Enable: Following function enabled 		-
Remote A/C by Smart Key Display "Remote A/C by Smart Key" function enabled/disabled status Disable or Enable Disable: Following function disabled
Enable: Following function enabled 		-
eConnect State Notification Display "eConnect State Notification" function enabled/disabled status Disable or Enable Disable: Following function disabled
Enable: Following function enabled 		-
eConnect Event Notification Display "eConnect Event Notification" function enabled/disabled status Disable or Enable Disable: Following function disabled
Enable: Following function enabled 		-
eConnect State Change Notification Display "eConnect State Change Notification" function enabled/disabled status Disable or Enable Disable: Following function disabled
Enable: Following function enabled 		-
eConnect Remote Operation Display "eConnect Remote Operation" function enabled/disabled status Disable or Enable Disable: Following function disabled
Enable: Following function enabled 		-
Driving Trip Data Notification Display "Driving Trip Data Notification" function enabled/disabled status Disable or Enable Disable: Following function disabled
Enable: Following function enabled 		-
eConnect Remote Vehicle Location Display "eConnect Remote Vehicle Location" function enabled/disabled status Disable or Enable Disable: Following function disabled
Enable: Following function enabled 		-
Helpnet Account Status Display emergency call service account status No Account, With Account or Other - -
Automatic Collision Notification Function Display "Automatics Collision Notification" function enabled/disabled status Disable or Enable Disable: Following function disabled
Enable: Following function enabled 		-
Manual Emergency Call Function Display "Manual Emergency Call" function enabled/disabled status Disable or Enable Disable: Following function disabled
Enable: Following function enabled 		-
Wireless Health Check Function Display "Wireless Health Check" function enabled/disabled status Disable or Enable Disable: Following function disabled
Enable: Following function enabled 		-
Stolen Vehicle Tracking Function Display "Stolen Vehicle Tracking" function enabled/disabled status Disable or Enable Disable: Following function disabled
Enable: Following function enabled 		-
Remote Engine Starter Registration Status Remote Engine Starter registration status Not Registered or Registered - -
Telematics Microphone Volume Adjust Setting of Telematics Microphone Volume Adjust Min.: 1, Max.:11 Displays customize setting of Telematics Microphone Volume Adjust -
Telematics Speaker Volume Adjust Setting of Telematics Speaker Volume Adjust Min.: 1, Max.:14 Displays customize setting of Telematics Speaker Volume Adjust -
Remote Door Lock Function Remote Door Lock Function registration status Not Registered, Registered or Registration Not Required - -
Communication Remote Engine Starter Display "Remote Engine Starter" function enabled/disabled status Not Available or Available Not Available: Remote engine starter is not connected
Available: Remote engine starter is connected 		-
Communication Pausing State Display "Communication Pausing" function status Cancel Pausing or Pausing - -
Green Indicator The green indicator light on the emergency call switch panel illumination status Lighting OFF, Nighttime Brightness-Low, Nighttime Brightness-Middle, Nighttime Brightness-High or Daytime Brightness - -
Red Indicator The red indicator light on the emergency call switch panel illumination status Lighting OFF, Nighttime Brightness-Low, Nighttime Brightness-Middle, Nighttime Brightness-High or Daytime Brightness - -
Beep Beep volume Min.: 1, Max.:14 - -


ACTIVE TEST


HINT:

Using the GTS to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.


a.

Connect the GTS to the DLC3.


b.

Turn the ignition switch to ON.


c.

Turn the GTS on.


d.

Enter the following menus: Body Electrical / Telematics / Active Test.


e.

According to the display on the GTS, perform the Active Test.

Body Electrical > Telematics > Active Test
Tester Display Measurement Item Control Range Diagnostic Note
Green Indicator Operate Emergency Call Switch Green Indicator Lighting OFF, Nighttime Brightness - Low, Nighttime Brightness - Middle, Nighttime Brightness - High or Daytime Brightness Operate with ignition switch ON and the vehicle stopped.
Red Indicator OperateEmergency Call Switch Red Indicator Lighting OFF, Nighttime Brightness - Low, Nighttime Brightness - Middle, Nighttime Brightness - High or Daytime Brightness Operate with ignition switch ON and the vehicle stopped.
Beep Operate speakers Min.: 1, Max.:14 Operate with ignition switch ON and the vehicle stopped.