WIPER / WASHER  WASHER NOZZLE(for Rear Side)  ADJUSTMENT  

Using a thin-bladed screwdriver, adjust the nozzle jet of the rear washer nozzle so that the contact area is within the standard.

Click hereVehicle Exterior>WIPER / WASHER>WASHER NOZZLE (for Rear Side)>ON-VEHICLE INSPECTION201910,999999,_59,_083109,_0402382,RM100000001JI4L,

NOTICE:

Do not use a safety pin or other pointed tools. Doing so may damage the inside of the rear washer nozzle sub-assembly.

HINT:

Use a thin-bladed screwdriver with a tip approximately 1 mm (0.0394 in.) thick.