RM36D0EC
_51
Engine / Hybrid System
_083055
CRUISE CONTROL
_0401004
FRONT RADAR SENSOR SYSTEM
U
CRUISE CONTROL FRONT RADAR SENSOR SYSTEM TERMINALS OF ECU
CHECK MILLIMETER WAVE RADAR SENSOR ASSEMBLY
- NOTICE:
- ·
Turning the ignition switch to ON with connectors disconnected may cause DTCs to be stored. Make sure to clear the DTCs after inspection has been performed.
·Do not apply excessive force to the millimeter wave radar sensor assembly connector.
3.365,0.063 3.792,0.302
0.427,0.24
3.469,0.104 3.927,0.302
0.458,0.198
10
false
B9
a.
Measure the voltage and resistance according to the value(s) in the table below.
| Terminal No. (Symbol) | Wiring Color | Terminal Description | Condition | Specified Condition |
|---|---|---|---|---|
|
*1: w/o Stop and Start System *2: w/ Stop and Start System |
||||
| B9-8 (IGB) - B9-1 (SGND) | SB - W-B | Power source | Ignition switch ON | 11 to 14 V*1
10.5 to 16 V*2 |
| Ignition switch off | Below 1 V | |||
| B9-1 (SGND) - Body ground | W-B - Body ground | Ground | Always | Below 1 Ω |