Freeze frame data is stored at the time when DTCs are detected.
When freeze frame data at the time it is stored that a DTC is detected, data is not updated or cleared until the stored data is cleared (Clear DTCs).
CHECK FREEZE FRAME DATA
According to the display on the GTS, display the freeze frame data for the selected DTC.
| Tester Display | Measurement Item | Range | Normal Condition | Diagnostic Note |
|---|---|---|---|---|
| Total Distance Traveled | Total distance traveled | 1 to 999999 | Same as actual total distance traveled | For the unit, refer to "Total Distance Traveled - Unit" |
| Total Distance Traveled - Unit | Total distance traveled unit | km or mile | km: km
mile: mile |
- |
| Steering Angle | Steering angle | -3276.8 to 3276.7 deg | Steering left: Changes positively continuously
Steering right: Changes negative continuously |
- |
| Vehicle Speed | Vehicle speed | 0 to 655.35 km/h | Equivalent to actual vehicle speed | - |
| EPS Steering Angle Value | EPS steering angle value | -3276.8 to 3276.7 deg | Steering left: Changes positively continuously
Steering right: Changes negative continuously |
- |
| Target Steering Angle Value (SBW) | Target steering angle value (SBW) | -3276.8 to 3276.7 deg | Steering left: Changes positively continuously
Steering right: Changes negative continuously |
- |
CLEAR FREEZE FRAME DATA
Clearing the DTCs will also clear the freeze frame data.
Clear the DTCs and freeze frame data.