CUSTOMIZE PRE-COLLISION SYSTEM
When the customer requests a change in a function, first make sure that the function can be customized.
Be sure to make a note of the current settings before customizing.
When troubleshooting a function, first make sure that the function is set to the default setting.
Customizing with the Multi-information Display
Turn the ignition switch to ON.
Select the setting by referring to the table below.
Using the steering pad switches, change the customize settings.
Each item is displayed on the "Setting" tab on the multi-information display.
| Display | Description | Setting | Default |
|---|---|---|---|
| PCS* | Turns the pre-collision system function on/off. | ON/OFF | ON |
| Sensitivity | Sets the pre-collision system function warning sensitivity | Early/Middle/Late | Middle |
*: The switch cannot be operated to OFF while driving.