THEFT DETERRENT / KEYLESS ENTRY DIGITAL KEY RECEIVER(for Front Floor) INSTALLATION
PROCEDURE
890G0
1.INSTALL BLE INDOOR DIGITAL KEY RECEIVER ASSEMBLY
Engage the clamp to install the ble indoor digital key receiver assembly.
- NOTICE:
-
Be careful when installing the ble indoor digital key receiver assembly. If the ble indoor digital key receiver assembly is dropped, replace it with a new one.
Connect the connector.
58803C
2.INSTALL CONSOLE CUP HOLDER BOX SUB-ASSEMBLY
58804A
3.INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY
33504F
4.INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY
for K120:
for P710:
58835C
5.INSTALL CONSOLE BOX ORNAMENT (w/o Seat Heater System)
58835C
6.INSTALL CONSOLE BOX ORNAMENT (w/ Seat Heater System)
58833B
7.INSTALL UPPER NO. 1 CONSOLE PANEL GARNISH
58834B
8.INSTALL UPPER NO. 2 CONSOLE PANEL GARNISH
55475A
9.INSTALL NO. 2 INSTRUMENT CLUSTER FINISH PANEL GARNISH
55317E
10.INSTALL NO. 1 INSTRUMENT SIDE PANEL
62311B
11.INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP RH
- HINT:
-
Use the same procedure as for the LH side.