CUSTOMIZE METER / GAUGE SYSTEM
When the customer requests a change in a function, first make sure that the function can be customized.
Be sure to make a note of the current settings before customizing.
When troubleshooting a function, first make sure that the function is set to the default setting.
Customizing with the GTS
Select the setting by referring to the table below.
| Tester Display | Description | Default | Setting | ECU |
|---|---|---|---|---|
| Flasher Sound Volume Adjust | Function to change the flasher sound volume | Medium | $02:Large,$00:Medium,$01:Small | Combination meter assembly |
| Suggestion Service Function | Function to change the suggestion service display setting | ON | 00:OFF,01:Only Parked,11:ON | Main body ECU (Multiplex network body ECU) |
| Tester Display | Description | Default | Setting | ECU |
|---|---|---|---|---|
| ODO Display Time After IG OFF Adjust | Function to change the ODO display time after the ignition switch is turned off | 30s | $00:30s,$01:60s,$02:600s,$03:OFF | Combination meter assembly |
Customizing with the multi-display
Enter the following menus: Vehicle icon / Vehicle settings.
Select the setting by referring to the table below.
| Display | Default | Content | Setting | Relevant ECU |
|---|---|---|---|---|
| Convenience Services | On | Function to change the suggestion service display setting | On, On (when the vehicle is stopped), Off | Main body ECU (Multiplex network body ECU) |
Customizing with the multi-information display
Select the settings tab on the multi-information display.
Select the setting by referring to the table below.
When the cable is disconnected from the negative (-) battery terminal, some of the settings will be reset. Therefore, it is necessary to make a note of each set value before disconnecting the cable.
As some values cannot be selected when the vehicle is being driven, perform the procedure with the vehicle stopped.
Depending on the specifications of the vehicle, some items may not be displayed.
| Display | Description | Setting | ECU |
|---|---|---|---|
| "Lane Center" | Lane centering function setting | ON/OFF | Forward recognition camera |
| "Steering Assist" | Steering assist function setting | ON/OFF | |
| "Sensitivity" | Lane departure alert timing level setting | 2 levels | |
| "Sway Warning" | Vehicle sway warning function setting | ON/OFF | |
| "Sway Sensitivity" | Sway warning sensitivity level setting | 3 levels |
| Display | Description | Setting | ECU |
|---|---|---|---|
| - | Pre-collision system setting | ON/OFF | Forward recognition camera |
| "Sensitivity" | Pre-collision system sensitivity level setting | 3 levels |
| Display | Description | Setting | ECU |
|---|---|---|---|
| - | Blind spot monitor system setting | ON/OFF | Blind spot monitor sensor RH (B) |
| "Brightness" | Outer rear view mirror indicator brightness level setting | 2 levels | |
| "Sensitivity" | Blind spot monitor system sensitivity level setting | 4 levels |
| Display | Description | Setting | ECU |
|---|---|---|---|
| - | TOYOTA parking assist-sensor system setting | ON/OFF | Clearance warning ECU assembly |
| "Volume" | Clearance warning buzzer volume level setting | 3 levels |
| Display | Description | Setting | ECU |
|---|---|---|---|
| - | RCTA function setting | ON/OFF | Blind spot monitor sensor RH (B) |
| "Volume" | RCTA buzzer (blind spot monitor buzzer) volume setting | 3 levels |
| Display | Description | Setting | ECU |
|---|---|---|---|
| - | Parking support brake system setting | ON/OFF | Clearance warning ECU assembly |
| Display | Description | Setting | ECU | |
|---|---|---|---|---|
| - | Headup display system setting | ON/OFF | Meter mirror sub-assembly | |
| "HUD Brightness/Position" | Brightness and position setting for headup display | - | ||
| "HUD Driving Support" | "Tachometer Settings" | Display setting for headup display | "Blank/Hybrid System/Eco Indicator/Tachometer" | |
| "Navigation" | Display setting for headup display | ON/OFF | ||
| "Lane" | Display setting for headup display | ON/OFF | ||
| "Driving Assist" | Display setting for headup display | ON/OFF | ||
| "Compass" | Display setting for headup display | ON/OFF | ||
| "Audio" | Display setting for headup display | ON/OFF | ||
| "HUD Rotation" | Headup display image calibration (rotation calibration) | - | ||
| Display | Description | Setting | ECU |
|---|---|---|---|
| - | Meter illumination setting | 22 levels | Combination meter assembly |
| Display | Description | Setting | ECU | |
|---|---|---|---|---|
| PBD | "System Settings" | Power back door system setting | ON/OFF | Multiplex network door ECU |
| "Touchless Sensor" | Hands free power back door function setting | ON/OFF | ||
| "Opening Adjustment" | Back door opening stop position setting when operated by power back door system | 5 levels | ||
| "Volume" | Power back door buzzer volume level setting | 3 levels | ||
| Stop and Start | Engine stop time setting for stop and start system when automatic air conditioning system is operating | "Extended/Standard" | Engine stop and start ECU | |
| TPWS | "Setting Pressure" | Tire inflation pressure display function setting | - | Tire pressure warning ECU and receiver |
| "Identify Wheel" | Tire inflation pressure display function setting | - | ||
| "Setting Unit" | Tire inflation pressure display function setting | "kPa/psi/bar" | ||
| "Rear Seat Reminder" | Rear seat reminder function setting | ON/OFF | Main body ECU (Multiplex network body ECU) | |
| "Oil Maintenance" | Engine oil maintenance required reminder data reset | Yes/No | ECM | |
| Display | Description | Setting | ECU | ||
|---|---|---|---|---|---|
| "Language" | Display language setting | Chinese/English | Related ECUs | ||
| "Units" | Display units setting | ·
km/L ·
L/100 km |
|||
| Meter Type | Multi-information display layout setting | 2 types | Combination meter assembly | ||
| Eco driving indicator light | Eco driving indicator light display setting | ON/OFF | |||
| EV driving indicator light | EV driving indicator light setting | ON/OFF | |||
| Eco friendly driving information tab | "Hybrid System" | "ECO Guidance" | Display setting in eco-friendly driving information tab | ON/OFF | |
| "Drive Info Type" | Displayed drive information display item setting | "Trip/Total" | |||
| "Drive Info Items" | Displayed drive information display item setting | "No Display/Average Speed/Distance/Elapsed Time" | |||
| Audio tab | Audio system-linked display setting | ON/OFF | |||
| Vehicle information tab | "Display Contents" | "Energy Monitor" | Energy monitor display setting | ON/OFF | |
| "AWD" | AWD system monitor display setting | ON/OFF | |||
| Stop and Start Reset | Stop and start system information data reset | Yes/No | |||
| "Closing Display" | Current trip result display setting | "Drive Info/Eco Score" | |||
| "Pop-Up Display" | "TbT Navigation" | Interrupt display setting | ON/OFF | ||
| "Telephone" | Interrupt display setting | ON/OFF | |||
| "Audio Operation" | Interrupt display setting | ON/OFF | |||
| "Volume Operation" | Interrupt display setting | ON/OFF | |||
| Stop and Start Duration | Interrupt display setting | ON/OFF | |||
| Stop and Start Status | Interrupt display setting | ON/OFF | |||
| "Multi-Information Display OFF" | Multi-information display off setting | - | |||
| "Default Settings" | Reset the combination meter settings to the default setting | Yes/No | Related ECUs | ||