RM38N0EC _52 Drivetrain _111807 DRIVE SHAFT / PROPELLER SHAFT _0525832 REAR DRIVE SHAFT ASSEMBLY(for GTMC Made) G

DRIVE SHAFT / PROPELLER SHAFT  REAR DRIVE SHAFT ASSEMBLY(for GTMC Made)  INSPECTION  


PROCEDURE

Hide 1.INSPECT REAR DRIVE SHAFT ASSEMBLY (for Type A)

a.
C459490

Check that there is no excessive play in the radial direction of the outboard joint.


b.

Check that the inboard joint slides smoothly in the thrust direction.


c.

Check that there is no excessive play in the radial direction of the inboard joint.


d.

Check the boots for damage.


e.
C459491N01
1.573,1.688 1.802,1.865 0.229,0.177 10 false A

Check whether each drive shaft dimension (A) is within specification.

NOTICE:

Keep the drive shaft assembly level during inspection.


Dimension (A)(for M20C-FKS):
for LH Side 754.35 mm (2.47 ft.)
for RH Side 754.35 mm (2.47 ft.)


Dimension (A)(for A25D-FXS):
for LH Side 718.45 mm (2.36 ft.)
for RH Side 790.45 mm (2.59 ft.)



Hide 2.INSPECT REAR DRIVE SHAFT ASSEMBLY (for Type B)

a.
C116430

Check that there is no excessive play in the radial direction of the outboard joint.


b.

Check that the inboard joint slides smoothly in the thrust direction.


c.

Check that there is no excessive play in the radial direction of the inboard joint.


d.

Check the boots for damage.


e.
C127699N11
1.521,1.552 1.74,1.771 0.219,0.219 10 false A

Check whether each drive shaft dimension (A) is within specification.

NOTICE:

Keep the drive shaft assembly level during inspection.


Dimension (A)(for M20C-FKS):
for LH Side 754.35 mm (2.47 ft.)
for RH Side 754.35 mm (2.47 ft.)


Dimension (A)(for A25D-FXS):
for LH Side 718.45 mm (2.36 ft.)
for RH Side 790.45 mm (2.59 ft.)