RM38N0EC _V1 General _112220 MAINTENANCE _0525516 DIFFERENTIAL OIL G

MAINTENANCE  DIFFERENTIAL OIL  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 1.INSPECT DIFFERENTIAL OIL

a.

Stop the vehicle on a level surface.


b.
C435841

Using a 10 mm socket hexagon wrench, remove the rear differential filler plug and gasket.


c.
C278961C01
2.667,0.854 2.979,1.052 0.313,0.198 10 false *a
*a 0 to 5 mm (0 to 0.196 in.)


Check that the oil level is between 0 to 5 mm (0 to 0.196 in.) from the bottom lip of the differential filler plug hole.

NOTICE:
·

After changing the oil seal, drive the vehicle and then check the oil level again.

·

Too much or too little oil will lead to differential problems.




d.

If there is not enough oil, inspect for oil leaks and fill the differential carrier assembly with Toyota genuine differential gear oil LT API GL-5 or equivalent


e.
C435841

Using a 10 mm socket hexagon wrench, install a new gasket and the rear differential filler plug.

Torque:
39 N*m (398 kgf*cm, 29 ft.*lbf)