CUSTOMIZE POWER BACK DOOR SYSTEM
When the customer requests a change in a function, first make sure that the function can be customized.
Record the current settings before customizing.
The following items can be customized.
Customizing with the GTS.
Connect the GTS to the DLC3.
Turn the ignition switch to ON.
Turn the GTS on.
Enter the following menus: Customize Setting / PSD & PBD operation.
Select the setting by referring to the table below.
| Tester Display | Description | Default | Setting | ECU |
|---|---|---|---|---|
| PBD SW Operating Condition Setting | Back door control switch operation | Long Press (0.8s) | $00:Short Press (0.04s),$01:Long Press (0.8s) | Multiplex network door ECU |
| PBD Buzzer Function | Status of the power back door buzzer | ON | $00:OFF,$01:ON | Multiplex network door ECU |
| PBD Assist Close Function | Function that enables/disables the power back door assist close operation. When set to ON, the back door will close automatically when operated in the close direction manually. | ON | $00:OFF,$01:ON | Multiplex network door ECU |
| PBD Assist Open Function | Function that enables/disables the power back door assist open operation. When set to ON, the back door will open automatically when the back door opener switch (open switch) is operated. | OFF | $00:OFF,$01:ON | Multiplex network door ECU |
| PBD Door Unlock with One Motion Setting | Function that selects the door or doors to unlock when the back door is locked and the electrical key transmitter sub-assembly (electrical key) is pushed to operate the power back door.*2 | All Doors | $00:Back Door,$01:All Doors | Multiplex network door ECU |
| PBD Wireless Function | Function that operates the power back door by pushing the transmitter switch (electrical key transmitter sub-assembly). | ON | $00:OFF,$01:ON | Multiplex network door ECU |
| PBD Wireless One Motion Function | Wireless one motion function*1 | OFF | $00:OFF,$01:ON | Multiplex network door ECU |
| PBD Wireless SW Setting | Wireless operation setting condition | Long Press (0.8s) | $00:1 Time Press,$01:2 Times Press,$02:Long Press (0.8s) | Multiplex network door ECU |
*1: The settings are enabled only when "PBD Wireless Function" is set to "ON"
*2: Enables when the following conditions are met:
"PBD Wireless One Motion Function" is set to other than "ON"
Customizing with the multi-information display (combination meter assembly)
Turn the ignition switch to ON.
Enter the following menus: Vehicle Settings / PBD.
Select the setting by referring to the table below.
| Display | Description | Default | Setting | Relevant ECU |
|---|---|---|---|---|
| System Settings | Function that enables/disables the power back door. | ON | OFF / ON | Multiplex network door ECU |
| Hands Free* | Function that enables/disables the hands free power back door | ON | OFF / ON | Multiplex network door ECU |
| Opening Adjustment | Function that changes the position that the power back door stops during an open operation. | 5 | 5, 4, 3, 2 or 1 | Multiplex network door ECU |
| Volume | Function that changes the volume setting of the power back door buzzer. | 3 | 1/2/3 | Multiplex network door ECU |
*: w/ Hands Free Power Back Door