RM38N0EC _59 Vehicle Exterior _111844 WINDOW / GLASS _0499616 POWER WINDOW REGULATOR MOTOR(for Front Door) G

WINDOW / GLASS POWER WINDOW REGULATOR MOTOR(for Front Door) INSPECTION

PROCEDURE

Hide Display 85720D 1.INSPECT POWER WINDOW REGULATOR MOTOR ASSEMBLY LH

4.938,1.177 5.5,1.385 true 1.24,1.323 2.021,1.333 true 0.167,0.135 0.542,0.427 0.375,0.292 12 false *A 3.896,0.115 4.333,0.479 0.438,0.365 12 false *B 0.708,2.208 1.021,2.365 0.313,0.156 10 false *a 2.771,1.802 3.083,1.958 0.313,0.156 10 false *b 2.938,1.49 3.25,1.646 0.313,0.156 10 false *c 1.073,1.25 1.385,1.406 0.313,0.156 10 false *d 4.76,1.083 5.073,1.24 0.313,0.156 10 false *d 6.458,1.594 6.771,1.75 0.313,0.156 10 false *c 6.271,1.885 6.583,2.042 0.313,0.156 10 false *b 4.156,2.219 4.469,2.375 0.313,0.156 10 false *a

*A	for SFTM Made	*B	for GTMC Made
*a	Component without harness connected (Power Window Regulator Motor Assembly LH)	*b	Clockwise
*c	Counterclockwise	*d	Motor Gear

Connect a positive (+) lead from the auxiliary battery to connector terminal 2.

NOTICE:: Do not connect a positive (+) lead from the auxiliary battery to any terminal other than terminal 2 to avoid damaging the pulse sensor inside the motor.

Connect a negative (-) lead from the auxiliary battery to connector terminals 1 and 7 or 10.

Check that the motor gear rotates smoothly as follows:

OK:

Measurement Condition	Specified Condition
1. Connect a positive (+) lead from the auxiliary battery to terminal 2, connect a negative (-) lead from the auxiliary battery to terminal 1, and keep them connected for 3 seconds or more. 2. With terminals 2 and 1 connected, connect a negative (-) lead from the auxiliary battery to terminal 10.	Motor gear rotates counterclockwise
1. Connect a positive (+) lead from the auxiliary battery to terminal 2, connect a negative (-) lead from the auxiliary battery to terminal 1, and keep them connected for 3 seconds or more. 2. With terminals 2 and 1 connected, connect a negative (-) lead from the auxiliary battery to terminal 7.	Motor gear rotates clockwise

If the result is not as specified, replace the power window regulator motor assembly LH.

CAUTION:: Initialize the power window control system after installing the front door window regulator assembly.

Hide Display 85710E 2.INSPECT POWER WINDOW REGULATOR MOTOR ASSEMBLY RH

Connect a positive (+) lead from the auxiliary battery to connector terminal 2.

0.771,1.125 1.323,1.323 false 4.313,1.229 4.865,1.427 false 0.167,0.135 0.542,0.427 0.375,0.292 12 false *A 3.667,0.042 4.104,0.406 0.438,0.365 12 false *B 0.729,2.271 1.042,2.427 0.313,0.156 10 false *a 0.469,1.552 0.781,1.708 0.313,0.156 10 false *b 0.74,1.917 1.052,2.073 0.313,0.156 10 false *c 0.594,1.01 0.906,1.167 0.313,0.156 10 false *d 4.167,1.125 4.479,1.281 0.313,0.156 10 false *d 4.292,1.969 4.604,2.125 0.313,0.156 10 false *c 4.031,1.656 4.344,1.813 0.313,0.156 10 false *b 4.188,2.208 4.5,2.365 0.313,0.156 10 false *a

*A	for SFTM Made	*B	for GTMC Made
*a	Component without harness connected (Power Window Regulator Motor Assembly RH)	*b	Clockwise
*c	Counterclockwise	*d	Motor Gear

NOTICE:: Do not connect a positive (+) lead from the auxiliary battery to any terminal other than terminal 2 to avoid damaging the pulse sensor inside the motor.

Connect a negative (-) lead from the auxiliary battery to connector terminals 1 and 7 or 10.

Check that the motor gear rotates smoothly as follows:

OK:

Measurement Condition	Specified Condition
1. Connect the positive (+) lead from the auxiliary battery to terminal 2, connect a negative (-) lead from the auxiliary battery to terminal 1, and keep them connected for 3 seconds or more. 2. With terminals 2 and 1 connected, connect a negative (-) lead from the auxiliary battery to terminal 10.	Motor gear rotates clockwise
1. Connect a positive (+) lead from the auxiliary battery to terminal 2, connect a negative (-) lead from the auxiliary battery to terminal 1, and keep them connected for 3 seconds or more. 2. With terminals 2 and 1 connected, connect a negative (-) lead from the auxiliary battery to terminal 7.	Motor gear rotates counterclockwise

If the result is not as specified, replace the power window regulator motor assembly RH.

CAUTION:: Initialize the power window control system after installing the front door window regulator assembly.