DATA LIST
In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.
Using the GTS to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.
Connect the GTS to the DLC3.
Turn the ignition switch to ON.
Turn the GTS on.
Enter the following menus: Body Electrical / Main Body or Power Distribution Box / Data List.
Read the Data List according to the display on the GTS.
| Tester Display | Measurement Item | Range | Normal Condition | Diagnostic Note |
|---|---|---|---|---|
| Outer Mirror Fold Switch | Retractable outer mirror switch signal | OFF or ON | OFF: Retractable outer mirror switch not in retract position
ON: Retractable outer mirror switch in retract position |
- |
| Outer Mirror Auto Switch | Retractable outer mirror switch signal | OFF or ON | OFF: Retractable outer mirror switch not in auto retract position
ON: Retractable outer mirror switch in auto retract position |
- |
| Automatic Mirror Fold Setting | Auto power retract mirror function | ACC, Door Lock or Disable | Customize setting displayed | - |
| Tester Display | Measurement Item | Range | Normal Condition | Diagnostic Note |
|---|---|---|---|---|
| Mirror Heater Input Signal | Mirror heater drive signal (Input) | OFF or ON | OFF: Ignition switch ON, rear defogger switch off
ON: Ignition switch ON, rear defogger switch on |
- |
| Mirror Heater Output Signal | Mirror heater drive signal (Output) | OFF or ON | OFF: Ignition switch ON, rear defogger switch off
ON: Ignition switch ON, rear defogger switch on |
- |
| Mirror Heater Output Current | Mirror heater output current | 0 to 255.0 A | Mirror heater operating: 2.8 to 3.4 A | - |
| Mirror Heater Fuse Shut Off Status | Mirror heater output current shut off status | OFF or ON | OFF: Normal state
ON: Current shut off state |
- |
| Mirror Heater Fuse Shut Off Count | Mirror heater output current shut off count | 0 to 255 | 0 | - |
| Power Retract Mirror Input Signal | Power retract mirror drive signal (Input) | Stop, Retract or Return | Stop: Outer mirror switch not being operated
Retract: Outer mirror switch in retract position Return: Outer mirror switch in driving position |
- |
| Power Retract Mirror Output Signal | Power retract mirror drive signal (Output) | Stop, Retract or Return | Stop: Outer rear view mirror assembly not moving
Retract: Outer rear view mirror assembly moves to the retract position Return: Outer rear view mirror assembly moves to the driving position |
- |
| Power Retract Mirror Output Current | Power retract mirror output current | 0 to 255.0 A | Power retract mirror operating: 1.6 to 2.0 A | - |
| Power Retract Mirror Fuse Shut Off Status | Power retract mirror output current shut off status | OFF or ON | OFF: Normal state
ON: Current shut off state |
- |
| Power Retract Mirror Fuse Shut Off Count | Power retract mirror output current shut off count | 0 to 255 | 0 | - |
ACTIVE TEST
Using the GTS to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.
Connect the GTS to the DLC3.
Turn the ignition switch to ON.
Turn the GTS on.
Enter the following menus: Body Electrical / Main Body or Air Conditioner / Active Test.
Perform the Active Test according to the display on the GTS.
| Tester Display | Measurement Item | Control Range | Diagnostic Note |
|---|---|---|---|
| Mirror Fold Signal | Retract mirror operation | OFF or ON | - |
| Mirror Return Signal | Retract mirror operation | OFF or ON | - |
| Tester Display | Measurement Item | Control Range | Diagnostic Note |
|---|---|---|---|
| Rear Defogger Relay | Mirror Heater | OFF or ON | - |