CUSTOMIZE PANORAMIC FIXED MOONROOF WITH ONE-TOUCH FROSTED GLASS CONTROL SYSTEM
When the customer requests a change in a function, first make sure that the function can be customized.
Be sure to make a note of the current settings before customizing.
When troubleshooting a function, first make sure that the function is set to the default setting.
The following items can be customized.
Customizing with the GTS
Enter the following menus: Customize Setting / Slide Roof.
Select the setting by referring to the table below.
| Tester Display | Description | Default | Setting | ECU |
|---|---|---|---|---|
| Light Control Glass Brightness Memory Function | Function that memorizes state of dimmable panoramic roof glass when ignition switch is turned off | Disable | $00:Disable,$01:Enable | Main body ECU (Multiplex network body ECU) |
| Front SW Auto Operation | Auto-operation setting* | ON | 0:OFF,1:ON | Roof sunshade ECU (Sliding roof drive gear sub-assembly) |
*: for Long Type Panoramic Fixed Moonroof
Enter the following menus: Customize Setting / Others.
Select the setting by referring to the table below.
| Tester Display | Description | Default | Setting | ECU |
|---|---|---|---|---|
| Slide Roof Voice Control Function | Voice recognition linked roof shade open/close function* | Enable | $00:Disable,$01:Enable | Main body ECU (Multiplex network body ECU) |
| Light Control Glass Voice Control Function | Voice recognition linked dimmable panoramic roof glass dim/transparent function* | Enable | $00:Disable,$01:Enable | Main body ECU (Multiplex network body ECU) |
*: w/ Body Device Voice Recognition Function