CUSTOMIZE METER / GAUGE SYSTEM
When the customer requests a change in a function, first make sure that the function can be customized.
Be sure to make a note of the current settings before customizing.
When troubleshooting a function, first make sure that the function is set to the default setting.
Customizing with the GTS
Select the setting by referring to the table below.
| Tester Display | Description | Default | Setting | ECU |
|---|---|---|---|---|
| Flasher Sound Volume Adjust | Function to change the turn signal flasher buzzer sound volume | Medium | $02:Large,$00:Medium,$01:Small | Combination meter assembly |
| Proposal Services Function | Function to change the suggestion function display setting | ON | $00:OFF,$01:Parked,$03:ON | Main body ECU (Multiplex network body ECU) |
| Tester Display | Description | Default | Setting | ECU |
|---|---|---|---|---|
| ODO Display Time After IG OFF Adjust | Function to change the trip result display time after the ignition switch is turned off | 30s | $00:30s,$01:60s,$02:600s,$03:OFF | Combination meter assembly |
Customizing with the multi-display
Enter the following menus: Vehicle icon / Vehicle settings.
Select the setting by referring to the table below.
| Display | Default | Content | Setting | Relevant ECU |
|---|---|---|---|---|
| Suggestion Function | On | Function to change the suggestion function display setting | On/On (when the vehicle is stopped)/Off | Main body ECU (Multiplex network body ECU) |
Customizing with the multi-information display
Select the settings tab on the multi-information display.
Select the setting by referring to the table below.
When the cable is disconnected from the negative (-) auxiliary battery terminal, some of the settings will be reset. Therefore, it is necessary to make a note of each set value before disconnecting the cable.
As some values cannot be selected when the vehicle is being driven, perform the procedure with the vehicle stopped.
Depending on the specifications of the vehicle, some items may not be displayed.
| Display | Description | Setting | ECU |
|---|---|---|---|
| "Lane Center" | Lane centering function setting | ON/OFF | Forward recognition camera |
| "Steering Assist" | Steering assist function setting | ON/OFF | |
| "Sensitivity" | Lane departure alert timing level setting | 2 levels | |
| "Sway Warning" | Vehicle sway warning function setting | ON/OFF | |
| "Sway Sensitivity" | Sway warning sensitivity level setting | 3 levels |
| Display | Description | Setting | ECU |
|---|---|---|---|
| - | Pre-collision system setting | ON/OFF | Forward recognition camera |
| "Sensitivity" | Pre-collision system sensitivity level setting | 3 levels |
| Display | Description | Setting | ECU |
|---|---|---|---|
| - | TOYOTA parking assist-sensor system setting | ON/OFF | Clearance warning ECU assembly |
| "Volume" | Clearance warning buzzer volume level setting | 3 levels |
| Display | Description | Setting | ECU |
|---|---|---|---|
| - | Parking support brake system setting | ON/OFF | Clearance warning ECU assembly |
| Display | Description | Setting | ECU | |
|---|---|---|---|---|
| Stop and Start | Engine stop time setting for stop and start system when automatic air conditioning system is operating | "Extended/Standard" | Engine stop and start ECU | |
| "TPWS setting" | "Setting Pressure" | Tire inflation pressure display function setting | - | Tire pressure warning ECU and receiver |
| "Identify Wheel" | Tire inflation pressure display function setting | - | ||
| "Setting Unit" | Tire inflation pressure display function setting | "kPa/psi/bar" | ||
| "Rear Seat Reminder" | Rear seat reminder function setting | ON/OFF | Main body ECU (Multiplex network body ECU) | |
| "Oil Maintenance" | Engine oil maintenance required reminder data reset | Yes/No | ECM | |
| Display | Description | Setting | ECU | |
|---|---|---|---|---|
| "Language" | Display language setting | Chinese/English | Related ECUs | |
| "Units" | Display units setting | ·
km/L ·
L/100 km |
||
| Eco driving indicator light | Eco driving indicator light display setting | ON/OFF | Combination meter assembly | |
| EV driving indicator light | EV driving indicator light display setting | ON/OFF | ||
| "Digital Speed" | Digital speedometer display setting | ON/OFF | ||
| "Gadget Content" | Displayed drive information display item setting | "No Display/Average Speed/Distance/Elapsed Time" | ||
| "Fuel Economy Type" | Displayed drive information display item setting | "Trip/Total/Tank" | ||
| "Pop-Up Display" | "Telephone" | Interrupt display setting | ON/OFF | Combination meter assembly |
| "Audio Operation" | Interrupt display setting | ON/OFF | ||
| "Volume Operation" | Interrupt display setting | ON/OFF | ||
| "Voice Control" | Interrupt display setting | ON/OFF | ||
| Stop and Start Duration | Interrupt display setting | ON/OFF | ||
| Stop and Start Status | Interrupt display setting | ON/OFF | ||
| "MID OFF" | Multi-information display off setting | - | ||
| "Default Settings" | Reset the combination meter settings to the default setting | Yes/No | Related ECUs | |