☰ Toyota Venza☰ فهرستEngine / Hybrid System › M20C-FKS, M20D-FKS LUBRICATION › OIL PRESSURE AND TEMPERATURE SENSOR
RM38N0EC
_51
Engine / Hybrid System
_111787
M20C-FKS, M20D-FKS LUBRICATION
_0503325
OIL PRESSURE AND TEMPERATURE SENSOR
A
M20C-FKS, M20D-FKS LUBRICATION OIL PRESSURE AND TEMPERATURE SENSOR REMOVAL
PROCEDURE
51420
1.REMOVE NO. 2 ENGINE UNDER COVER ASSEMBLY
89448D
2.REMOVE OIL PRESSURE AND TEMPERATURE SENSOR
a.
Disconnect the oil pressure and temperature sensor connector.
b.
Using a 24 mm deep socket wrench, remove the oil pressure and temperature sensor.
- NOTICE:
-
If the oil pressure and temperature sensor is dropped or subjected to a strong impact, replace it with a new one.