RM38N0EC _52 Drivetrain _111807 DRIVE SHAFT / PROPELLER SHAFT _0503136 REAR DRIVE SHAFT ASSEMBLY(for SFTM Made) G

DRIVE SHAFT / PROPELLER SHAFT  REAR DRIVE SHAFT ASSEMBLY(for SFTM Made)  INSPECTION  


PROCEDURE

Hide 42340B 1.INSPECT REAR DRIVE SHAFT ASSEMBLY

a.
C110170

Check that there is no excessive play in the radial direction of the outboard joint.


b.

Check that the inboard joint slides smoothly in the thrust direction.


c.

Check that there is no excessive play in the radial direction of the inboard joint.


d.

Check the boots for damage.


e.
C234686N02
1.479,0.833 1.708,1.01 0.229,0.177 10 false A

Check whether each drive shaft dimension (A) is within specification.

NOTICE:

Keep the drive shaft assembly level during inspection.


Dimension (A):
for LH Side 718.4 mm (2.36 ft.)
for RH Side 791.4 mm (2.60 ft.)