ALL READINESS
With "All Readiness", you can check whether or not the DTC judgment has been completed by using the GTS.
You should check "All Readiness" after simulating malfunction symptoms or for validation after finishing repairs.
Turn the ignition switch off.
Connect the GTS to the DLC3.
Turn the ignition switch to ON.
Turn the GTS on.
Clear the DTCs even if no DTCs are stored. Enter the following menus: Chassis / Brake/EPB / Trouble Codes.
Turn the ignition switch off.
Start the engine.
Perform the DTC judgment driving pattern to run the DTC judgment.
Enter the following menus: Chassis / Brake/EPB / Utility / All Readiness.
| Tester Display |
|---|
| All Readiness |
Input the DTC to be confirmed.
Check the DTC judgment result.
| GTS Display | Description |
|---|---|
| Normal | ·
DTC judgment completed ·
System normal |
| Abnormal | ·
DTC judgment completed ·
System abnormal |
| Incomplete | ·
DTC judgment not completed ·
Perform the driving pattern |
| N/A | ·
Unable to perform DTC judgment ·
Number of DTCs which do not fulfill DTC preconditions has reached ECU memory limit ·
Perform the driving pattern |
If the judgment result shows Incomplete or N/A, perform the DTC confirmation driving pattern again.