RM38N0EC _95 ADAS / AD _111850 ADVANCED DRIVER ASSISTANCE SYSTEM _0502175 DYNAMIC RADAR CRUISE CONTROL SYSTEM(for Gasoline Model) C

ADVANCED DRIVER ASSISTANCE SYSTEM  DYNAMIC RADAR CRUISE CONTROL SYSTEM(for Gasoline Model)  U010087  Lost Communication with ECM/PCM "A" Missing Message  U012687  Lost Communication with Steering Angle Sensor Module Missing Message  U012987  Lost Communication with Brake System Control Module Missing Message  U015587  Lost Communication with Instrument Panel Cluster (IPC) Control Module Missing Message  U110687  Lost Communication with Electric Parking Brake Module Missing Message  


DESCRIPTION

The forward recognition camera communicates with each sensor and ECU via CAN communication.

If any malfunction is detected in a CAN communication circuit, one or more CAN communication system DTCs are stored.

DTC No. Detection Item DTC Detection Condition Trouble Area MIL DTC Output from Priority Note
U010087 Lost Communication with ECM/PCM "A" Missing Message When the dynamic radar cruise control system is operating, a communication malfunction between the ECM and forward recognition camera is detected for 5 seconds or more. CAN communication system Does not come on Radar Cruise2 B SAE Code: -
U012687 Lost Communication with Steering Angle Sensor Module Missing Message When the ignition switch is ON for 2 seconds or more, a communication error between the forward recognition camera and steering sensor continues for 5 seconds or more. CAN communication system Does not come on Radar Cruise2 B SAE Code: -
U012987 Lost Communication with Brake System Control Module Missing Message When the ignition switch is ON for 2 seconds or more, a communication error between the forward recognition camera and skid control ECU (brake actuator assembly) continues for 5 seconds or more. CAN communication system Does not come on Radar Cruise2 B SAE Code: -
U015587 Lost Communication with Instrument Panel Cluster (IPC) Control Module Missing Message When the ignition switch is ON for 3 seconds or more, a communication error between the forward recognition camera and combination meter assembly continues for 5 seconds or more. CAN communication system Does not come on Radar Cruise2 B SAE Code: -
U110687 Lost Communication with Electric Parking Brake Module Missing Message When the ignition switch is ON for 2 seconds or more, a communication error between the forward recognition camera and skid control ECU (brake actuator assembly) continues for 5 seconds or more. CAN communication system Does not come on Radar Cruise2 B SAE Code: -

PROCEDURE

1.CLEAR DTC (Radar Cruise2)
a.

Clear the DTCs.

Powertrain > Radar Cruise2 > Clear DTCs
50002 426
Result:
Proceed to
NEXT




NEXT

2.CHECK FOR DTCs (Radar Cruise2)
2.CHECK FOR DTCs (Radar Cruise2)

Pre-procedure1

a.

Make sure that the DTC detection conditions are met.

HINT:

If the detection conditions are not met, the system cannot detect the malfunction.



Procedure1

b.

Check for DTCs.

Powertrain > Radar Cruise2 > Trouble Codes
50001 426
Result:
Result Proceed to
CAN communication system DTC is not output A
CAN communication system DTC is output B



Post-procedure1

c.

None



A

USE SIMULATION METHOD TO CHECK

Click hereGeneral>INTRODUCTION>HOW TO TROUBLESHOOT ECU CONTROLLED SYSTEMS>HOW TO PROCEED WITH TROUBLESHOOTING


B

GO TO CAN COMMUNICATION SYSTEM

Click herePower Source / Network>NETWORKING>CAN COMMUNICATION SYSTEM (for Gasoline Model)>HOW TO PROCEED WITH TROUBLESHOOTING