RM38N0EC _58 Vehicle Interior _111840 SEAT BELT _0501512 FRONT SEAT INNER BELT ASSEMBLY(for Power Seat) G

SEAT BELT  FRONT SEAT INNER BELT ASSEMBLY(for Power Seat)  INSPECTION  


PROCEDURE

Hide 73240 1.INSPECT FRONT SEAT INNER BELT ASSEMBLY LH (for Driver Side w/o Seat Position Memory System)

a.
B276694C05
0.184,0.139 0.342,0.277 0.159,0.138 10 *a
*a Component without harness connected
(Front Seat Inner Belt Assembly)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
3(+) - 2(E) Driver side seat belt unfastened Below 1 Ω
Driver side seat belt fastened 10 kΩ or higher


If the result is not as specified, replace the front seat inner belt assembly.


Hide 73240 2.INSPECT FRONT SEAT INNER BELT ASSEMBLY LH (for Driver Side w/ Seat Position Memory System)

a.
B578009
1.458,0.333 1.885,0.531 0.427,0.198 1.479,2.677 1.938,2.906 0.458,0.229 1.594,2.719 2.052,2.917 0.458,0.198 10 false U26 1.542,0.365 2,0.563 0.458,0.198 10 false L45 0.271,0.188 0.583,0.385 0.313,0.198 10 false *a
*a Component without harness connected
(Front Seat Inner Belt Assembly)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition

Click Location & Routing(L45,U26)Location & Routing

Click Connector(L45)Seat>No. 2 Floor Wire>Front Seat Inner Belt Assembly LH

Click Connector(U26)Seat>Front Seat Wire RH / Front Seat Wire LH>Front Seat Inner Belt Assembly LH

L45-3(+) - L45-2(E) Driver side seat belt unfastened Below 1 Ω
Driver side seat belt fastened 10 kΩ or higher
L45-2(E) - U26-1 Driver side seat belt unfastened Below 1 Ω
Driver side seat belt fastened 10 kΩ or higher


If the result is not as specified, replace the front seat inner belt assembly.


Hide 73240 3.INSPECT FRONT SEAT INNER BELT ASSEMBLY (for Front Passenger Side)

a.
B337570
1.448,0.365 1.875,0.563 0.427,0.198 1.552,2.729 1.833,2.917 0.281,0.188 0.156,0.146 0.469,0.344 0.313,0.198 10 false *a 1.552,0.385 2.01,0.583 0.458,0.198 10 false K54 1.625,2.75 1.896,2.948 0.271,0.198 10 false z2
*a Component without harness connected
(Front Seat Inner Belt Assembly)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition

Click Location & Routing(K54,z2)Location & Routing

Click Connector(K54)Seat>Floor Wire>Front Seat Inner Belt Assembly RH

Click Connector(z2)Seat>Other>Front Seat Inner Belt Assembly RH, Belt Warning Occupant Detection Sensor

K54-3 (+) - K54-2 (E) Front passenger side seat belt unfastened Below 1 Ω
Front passenger side seat belt fastened 10 kΩ or higher
K54-5 (+) - z2-1 Always Below 1 Ω
K54-4 (E) - z2-3 Always Below 1 Ω


If the result is not as specified, replace the front seat inner belt assembly.