RM38N0EC _59 Vehicle Exterior _111831 DOOR / HATCH _0501456 HOOD LOCK CONTROL CABLE ASSEMBLY A

DOOR / HATCH HOOD LOCK CONTROL CABLE ASSEMBLY INSTALLATION

PROCEDURE

Hide Display 53630 1.INSTALL HOOD LOCK CONTROL CABLE ASSEMBLY

a.

Pass the hood lock control cable assembly into the engine compartment.

b.

Engage the grommet.

c.

Engage each clamp to install the hood lock control cable assembly.

Hide Display 53876A 2.INSTALL FRONT FENDER LINER LH

Click hereVehicle Exterior>EXTERIOR PANELS / TRIM>FRONT FENDER>REASSEMBLY202111,202203,_59,_111849,_0509433,RM100000002055I_02_0003,202203,999999,_59,_111849,_0509433,RM1000000022L3B_02_0003,

Hide Display 3.INSTALL FRONT TIRE LH

Click hereGeneral>MAINTENANCE>TIRE AND WHEEL>INSTALLATION202111,999999,_V1,_112220,_0502516,RM100000001ZAD3_01_0001,

Hide Display 53601 4.INSTALL HOOD LOCK CONTROL LEVER SUB-ASSEMBLY

a.

Connect the hood lock control cable assembly to install the hood lock control lever sub-assembly.

Hide Display 53601 5.CONNECT HOOD LOCK CONTROL LEVER SUB-ASSEMBLY

Click hereVehicle Interior>INTERIOR PANELS / TRIM>INSTRUMENT PANEL SAFETY PAD>INSTALLATION202111,202203,_58,_111843,_0501135,RM100000001Z52Z_01_0147,202203,202303,_58,_111843,_0501135,RM10000000226IU_01_0147,202303,999999,_58,_111843,_0501135,RM100000002BEWI_01_0147,

Hide Display 55606 6.INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

Click hereVehicle Interior>INTERIOR PANELS / TRIM>INSTRUMENT PANEL SAFETY PAD>INSTALLATION202111,202203,_58,_111843,_0501135,RM100000001Z52Z_01_0132,202203,202303,_58,_111843,_0501135,RM10000000226IU_01_0132,202303,999999,_58,_111843,_0501135,RM100000002BEWI_01_0132,

Hide Display 62112A 7.INSTALL COWL SIDE TRIM SUB-ASSEMBLY LH

Click hereVehicle Interior>INTERIOR PANELS / TRIM>ROOF HEADLINING>INSTALLATION202111,202203,_58,_111843,_0501311,RM100000001Z5HC_02_0045,202203,999999,_58,_111843,_0501311,RM1000000022LYM_02_0045,

Hide Display 67914B 8.INSTALL FRONT DOOR SCUFF PLATE LH

Click hereVehicle Interior>INTERIOR PANELS / TRIM>ROOF HEADLINING>INSTALLATION202111,202203,_58,_111843,_0501311,RM100000001Z5HC_02_0047,202203,999999,_58,_111843,_0501311,RM1000000022LYM_02_0047,

Hide Display 53510 9.INSTALL HOOD LOCK ASSEMBLY

a.

Apply MP grease to the sliding areas of the hood lock assembly.

b.

Connect the hood lock control cable assembly to the hood lock assembly.

c.

Install the hood lock assembly with the 3 bolts.

Torque:: 8.0 N*m (82 kgf*cm, 71 in.*lbf)

d.

Connect the connector.

Hide Display 17750A 10.INSTALL INLET AIR CLEANER ASSEMBLY

for M20C-FKS, M20D-FKS:

Click hereEngine / Hybrid System>M20C-FKS, M20D-FKS (ENGINE CONTROL)>THROTTLE BODY>INSTALLATION202111,999999,_51,_111785,_0503267,RM100000001ZE12_01_0036,

for A25D-FXS, A25F-FXS:

Click hereEngine / Hybrid System>A25D-FXS, A25F-FXS (ENGINE CONTROL)>THROTTLE BODY>INSTALLATION202111,999999,_51,_111794,_0503252,RM100000001ZDZD_01_0032,