RM38N0EC _52 Drivetrain _111808 AXLE AND DIFFERENTIAL _0501217 REAR AXLE HUB(for 2WD) A

AXLE AND DIFFERENTIAL REAR AXLE HUB(for 2WD) INSTALLATION

CAUTION / NOTICE / HINT

HINT:: ·

Use the same procedure for the RH and LH sides.

·

The following procedure is for the LH side.

PROCEDURE

Hide Display 42450B 1.INSTALL REAR AXLE HUB AND BEARING ASSEMBLY

C397669

a.

Install the rear axle hub and bearing assembly and rear disc brake dust cover sub-assembly to the rear axle carrier sub-assembly with the 4 bolts.

Torque:: 90 N*m (918 kgf*cm, 66 ft.*lbf)

Hide Display 2.INSPECT REAR AXLE HUB BEARING LOOSENESS

Click hereDrivetrain>AXLE AND DIFFERENTIAL>REAR AXLE HUB (for 2WD)>ON-VEHICLE INSPECTION202111,202203,_52,_111808,_0501217,RM100000001Z5B2_01_0004,202203,202303,_52,_111808,_0501217,RM1000000022EDB_01_0004,202303,202406,_52,_111808,_0501217,RM100000002B3B4_01_0004,202406,999999,_52,_111808,_0501217,RM100000002MQ9S_01_0004,

Hide Display 3.INSPECT REAR AXLE HUB RUNOUT

Click hereDrivetrain>AXLE AND DIFFERENTIAL>REAR AXLE HUB (for 2WD)>ON-VEHICLE INSPECTION202111,202203,_52,_111808,_0501217,RM100000001Z5B2_01_0005,202203,202303,_52,_111808,_0501217,RM1000000022EDB_01_0005,202303,202406,_52,_111808,_0501217,RM100000002B3B4_01_0005,202406,999999,_52,_111808,_0501217,RM100000002MQ9S_01_0005,

Hide Display 42431 4.INSTALL REAR DISC

Click hereBrake>BRAKE (REAR)>REAR BRAKE>INSTALLATION202111,999999,_54,_111817,_0502903,RM100000001ZC1X_04_0010,

Hide Display 5.INSTALL REAR DISC BRAKE CALIPER ASSEMBLY

Click hereDrivetrain>AXLE AND DIFFERENTIAL>REAR AXLE HUB BOLT>REPLACEMENT202111,202203,_52,_111808,_0501216,RM100000001Z5B0_01_0020,202203,202303,_52,_111808,_0501216,RM1000000022EDA_01_0020,202303,202406,_52,_111808,_0501216,RM100000002B3B3_01_0020,202406,999999,_52,_111808,_0501216,RM100000002MQ9O_01_0020,

Hide Display 890C0A 6.CONNECT NO. 2 PARKING BRAKE WIRE ASSEMBLY

a.

Connect the No. 2 parking brake wire assembly connector to the parking brake actuator assembly.

b.

Connect the No. 2 parking brake wire assembly connector to the rear skid control sensor.

Hide Display 7.INSTALL REAR WHEEL

Click hereGeneral>MAINTENANCE>TIRE AND WHEEL>INSTALLATION202111,999999,_V1,_112220,_0502516,RM100000001ZAD3,

Hide Display 8.CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL (for HV Model)

Click hereBrake>BRAKE (REAR)>REAR BRAKE>INSTALLATION202111,999999,_54,_111817,_0502903,RM100000001ZC1X_04_0037,

Hide Display 9. INITIALIZATION AFTER RECONNECTING AUXILIARY BATTERY TERMINAL (for HV Model)

Click hereGeneral>SETUP>WHEN DISCONNECTING OR RECONNECTING BATTERY TERMINAL>WORK PROCEDURE202111,202203,_V1,_111780,_0504976,RM100000001ZKRT,202203,202406,_V1,_111780,_0504976,RM1000000022CKY,202406,999999,_V1,_111780,_0504976,RM100000002MNUE,

HINT:: When disconnecting and reconnecting the auxiliary battery, there is an automatic learning function that completes learning when the respective system is used.; Click hereGeneral>SETUP>WHEN DISCONNECTING OR RECONNECTING BATTERY TERMINAL>AUTOMATIC LEARNING CHART202111,999999,_V1,_111780,_0504976,RM100000001ZKRU,

Hide Display 10.CHECK FOR SPEED SENSOR SIGNAL

·

for HV Model: Click hereBrake>BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS>ELECTRONICALLY CONTROLLED BRAKE SYSTEM (for HV Model)>SIGNAL CHECK202111,999999,_54,_111814,_0500671,RM100000001Z2YR,

·

for Gasoline Model: Click hereBrake>BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS>ELECTRONICALLY CONTROLLED BRAKE SYSTEM (for HV Model)>SIGNAL CHECK202111,999999,_54,_111814,_0500671,RM100000001Z2YR,