SEAT  REAR SEAT ASSEMBLY  REASSEMBLY  

for Gasoline Model:

i.

Using hog ring pliers, install 32 new hog rings in the order shown in the illustration.

3.01,0.823 3.167,1.021 0.156,0.198 10 true 2 3.01,1.177 3.167,1.375 0.156,0.198 10 true 1 3.01,0.552 3.167,0.75 0.156,0.198 10 true 3 3.042,1.854 3.198,2.052 0.156,0.198 10 true 5 4.01,0.573 4.167,0.771 0.156,0.198 10 true 8 4,0.844 4.156,1.042 0.156,0.198 10 true 7 3.99,1.167 4.146,1.365 0.156,0.198 10 true 6 3.99,1.51 4.146,1.708 0.156,0.198 10 true 9 3.031,1.552 3.188,1.75 0.156,0.198 10 true 4 2.563,0.438 2.719,0.635 0.156,0.198 10 true 22 1.917,0.438 2.073,0.635 0.156,0.198 10 true 24 2.24,0.438 2.396,0.635 0.156,0.198 10 true 23 1.49,0.531 1.646,0.729 0.156,0.198 10 true 30 1.49,0.823 1.646,1.021 0.156,0.198 10 true 29 1.479,1.156 1.635,1.354 0.156,0.198 10 true 28 1.469,1.542 1.625,1.74 0.156,0.198 10 true 31 1.469,1.885 1.625,2.083 0.156,0.198 10 true 32 1.938,1.604 2.094,1.802 0.156,0.198 10 true 27 2.24,1.604 2.396,1.802 0.156,0.198 10 true 26 2.563,1.604 2.719,1.802 0.156,0.198 10 true 25 3.99,1.896 4.146,2.094 0.156,0.198 10 true 10 4.469,1.604 4.625,1.802 0.156,0.198 10 true 14 4.781,1.615 4.938,1.813 0.156,0.198 10 true 15 5.094,1.604 5.25,1.802 0.156,0.198 10 true 16 4.448,0.427 4.604,0.625 0.156,0.198 10 true 11 4.771,0.427 4.927,0.625 0.156,0.198 10 true 12 5.094,0.427 5.25,0.625 0.156,0.198 10 true 13 5.521,0.552 5.677,0.75 0.156,0.198 10 true 19 5.531,0.854 5.688,1.052 0.156,0.198 10 true 18 5.542,1.177 5.698,1.375 0.156,0.198 10 true 17 5.552,1.542 5.708,1.74 0.156,0.198 10 true 20 5.552,1.865 5.708,2.063 0.156,0.198 10 true 21

NOTICE:

·

Be careful not to damage the bench type rear seat cushion cover.

·

Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the bench type rear seat cushion cover.

ii.

Engage the 20 hooks to install the bench type rear seat cushion cover to the rear seat cushion pad.

NOTICE:

Be careful not to damage the bench type rear seat cushion cover.

for HV Model:

i.

Using hog ring pliers, install 32 new hog rings in the order shown in the illustration.

3.01,1.156 3.167,1.354 0.156,0.198 10 true 1 3.021,1.521 3.177,1.719 0.156,0.198 10 true 4 3.021,1.875 3.177,2.073 0.156,0.198 10 true 5 3.01,0.823 3.167,1.021 0.156,0.198 10 true 2 3,0.583 3.156,0.781 0.156,0.198 10 true 3 1.865,0.427 2.021,0.625 0.156,0.198 10 true 24 2.24,0.427 2.396,0.625 0.156,0.198 10 true 23 2.635,0.417 2.792,0.615 0.156,0.198 10 true 22 1.469,0.521 1.625,0.719 0.156,0.198 10 true 30 1.469,0.823 1.625,1.021 0.156,0.198 10 true 29 1.458,1.146 1.615,1.344 0.156,0.198 10 true 28 1.448,1.531 1.604,1.729 0.156,0.198 10 true 31 1.448,1.875 1.604,2.073 0.156,0.198 10 true 32 1.896,1.625 2.052,1.823 0.156,0.198 10 true 27 2.229,1.635 2.385,1.833 0.156,0.198 10 true 26 2.583,1.625 2.74,1.823 0.156,0.198 10 true 25 4.427,1.604 4.583,1.802 0.156,0.198 10 true 14 4.802,1.615 4.958,1.813 0.156,0.198 10 true 15 5.125,1.615 5.281,1.813 0.156,0.198 10 true 16 5.135,0.427 5.292,0.625 0.156,0.198 10 true 13 4.76,0.427 4.917,0.625 0.156,0.198 10 true 12 4.375,0.417 4.531,0.615 0.156,0.198 10 true 11 3.99,0.604 4.146,0.802 0.156,0.198 10 true 8 4,0.833 4.156,1.031 0.156,0.198 10 true 7 3.99,1.146 4.146,1.344 0.156,0.198 10 true 6 3.979,1.51 4.135,1.708 0.156,0.198 10 true 9 3.979,1.854 4.135,2.052 0.156,0.198 10 true 10 5.542,0.531 5.698,0.729 0.156,0.198 10 true 19 5.542,0.813 5.698,1.01 0.156,0.198 10 true 18 5.552,1.135 5.708,1.333 0.156,0.198 10 true 17 5.552,1.521 5.708,1.719 0.156,0.198 10 true 20 5.563,1.865 5.719,2.063 0.156,0.198 10 true 21

NOTICE:

·

Be careful not to damage the bench type rear seat cushion cover.

·

Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the bench type rear seat cushion cover.

ii.

Engage the 16 hooks to install the bench type rear seat cushion cover to the rear seat cushion pad.

NOTICE:

Be careful not to damage the bench type rear seat cushion cover.

1.188,1.938 1.042,2.708 1.042,2.708 1.708,1.688 true 0.813,1.188 1.552,0.979 true 0.938,2.708 1.25,2.865 0.313,0.156 10 false *a 0.667,1.125 0.979,1.281 0.313,0.156 10 false *b

*a	Hook
*b	Guide

Engage the guide and 2 hooks and install the rear seat lock control lever sub-assembly RH to the rear seatback lock assembly RH.

Engage the guide and install the rear seatback lock assembly RH with the 3 bolts.

Torque:

18 N*m (184 kgf*cm, 13 ft.*lbf)

Install the 2 screws.

Using hog ring pliers, install the separate type rear seatback cover to the separate type rear seatback pad with 15 new hog rings in the order shown in the illustration.

1.292,1.823 1.448,2.021 0.156,0.198 10 true 1 1.01,1.833 1.167,2.031 0.156,0.198 10 true 2 1.615,1.833 1.771,2.031 0.156,0.198 10 true 3 1.927,0.969 2.083,1.167 0.156,0.198 10 true 12 2.01,1.385 2.167,1.583 0.156,0.198 10 true 11 2.042,1.802 2.198,2 0.156,0.198 10 true 10 2.042,2.042 2.198,2.24 0.156,0.198 10 true 13 2.042,2.292 2.198,2.49 0.156,0.198 10 true 14 2.042,2.563 2.198,2.76 0.156,0.198 10 true 15 0.563,2.573 0.719,2.771 0.156,0.198 10 true 9 0.563,2.313 0.719,2.51 0.156,0.198 10 true 8 0.573,2.063 0.729,2.26 0.156,0.198 10 true 7 0.563,1.802 0.719,2 0.156,0.198 10 true 4 0.583,1.385 0.74,1.583 0.156,0.198 10 true 5 0.688,0.948 0.844,1.146 0.156,0.198 10 true 6

NOTICE:

·

Be careful not to damage the separate type rear seatback cover.

·

Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the separate type rear seatback cover.

Engage the 3 hooks.

0,0 0,0 false

Install in this Direction

Install the separate type rear seatback cover with pad to the rear seatback frame sub-assembly RH as shown in the illustration.

0,0 0,0 false

Install in this Direction

Engage the 8 claws to install the 4 rear seat headrest supports as shown in the illustration.

0,0 0,0 false

Fastener

Close the 2 fasteners as shown in the illustration.

Using hog ring pliers, install 2 new hog rings.

NOTICE:

Be careful not to damage the separate type rear seatback cover RH.

Engage the 2 hooks.

0,0 0,0 false

Install in this Direction

Engage the 2 guides and 2 claws as shown in the illustration to install the rear seat center armrest cup holder sub-assembly.

Push in the direction indicated by the arrow (1) shown in the illustration to engage the guide.

0,0 0,0 false

	Install in this Direction (1)		Install in this Direction (2)
	Install in this Direction (3)	-	-

Install the rear seat center armrest assembly with the washer and bolt.

Torque:

18 N*m (184 kgf*cm, 13 ft.*lbf)

0,0 0,0 false

Install in this Direction

Engage the guide and claw as shown in the illustration to install the center armrest hinge cover.

Engage the 4 claws to install a new rear seatback upper lock bezel RH.

0,0 0,0 false

Install in this Direction

Engage the 2 guides, clip and 3 claws as shown in the illustration to install the rear seatback lower lock bezel RH.

Install the rear seat shoulder belt cover.

0,0 0,0 false

Install in this Direction

Engage the 2 guides to install the seat belt anchor cover cap as shown in the illustration.

Engage the 2 guides and 2 claws to install the rear seat shoulder belt cover and seat belt anchor cover cap.

Using hog ring pliers, install the separate type rear seatback cover to the separate type rear seatback pad with 15 new hog rings in the order shown in the illustration.

1.76,1.813 1.917,2.01 0.156,0.198 10 true 1 1.385,1.802 1.542,2 0.156,0.198 10 true 2 2.125,1.813 2.281,2.01 0.156,0.198 10 true 3 1.042,0.833 1.198,1.031 0.156,0.198 10 true 6 0.948,1.313 1.104,1.51 0.156,0.198 10 true 5 0.885,1.823 1.042,2.021 0.156,0.198 10 true 4 0.896,2.115 1.052,2.313 0.156,0.198 10 true 7 0.896,2.417 1.052,2.615 0.156,0.198 10 true 8 0.896,2.719 1.052,2.917 0.156,0.198 10 true 9 2.563,2.719 2.719,2.917 0.156,0.198 10 true 15 2.573,2.417 2.729,2.615 0.156,0.198 10 true 14 2.552,2.115 2.708,2.313 0.156,0.198 10 true 13 2.563,1.823 2.719,2.021 0.156,0.198 10 true 10 2.521,1.333 2.677,1.531 0.156,0.198 10 true 11 2.427,0.844 2.583,1.042 0.156,0.198 10 true 12

NOTICE:

·

Be careful not to damage the separate type rear seatback cover.

·

Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the separate type rear seatback cover.

0,0 0,0 false

Install in this Direction

Engage the 4 claws to install the 2 rear seat headrest supports as shown in the illustration.

0,0 0,0 false

Fastener

Close the 2 fasteners as shown in the illustration.

Using hog ring pliers, install 2 new hog rings.

NOTICE:

Be careful not to damage the separate type rear seatback cover LH.

Engage the hook.