RM38N0EC _56 Audio / Visual / Telematics _111825 PARK ASSIST / MONITORING _0500435 BLIND SPOT MONITOR SYSTEM W

PARK ASSIST / MONITORING  BLIND SPOT MONITOR SYSTEM  CUSTOMIZE PARAMETERS  


CUSTOMIZE BLIND SPOT MONITOR SYSTEM


a.

Customizing with the GTS

NOTICE:
·

When the customer requests a change in a function, first make sure that the function can be customized.

·

Be sure to make a note of the current settings before customizing.

·

When troubleshooting a function, first make sure that the function is set to the default setting.



i.

Connect the GTS to the DLC3.


ii.

Turn the ignition switch to ON.


iii.

Turn the blind spot monitor system on.


iv.

Turn the GTS on.


v.

Enter the following menus: Body Electrical / Blind Spot Monitor "B" or Blind Spot Monitor "A" / Utility


vi.

Select the setting by referring to the table below.

Blind Spot Monitor
Tester Display Description Default Setting ECU
BSM Function Switches the BSM function on and off. Valid $00:Valid,$01:Invalid Blind Spot Monitor Sensor LH (B)
RCTA Function Switches the RCTA function on and off. Valid $00:Valid,$01:Invalid Blind Spot Monitor Sensor LH (B)
50006 102


b.

Customizing with multi-information display

NOTICE:
·

When the customer requests a change in a function, first make sure that the function can be customized.

·

Be sure to make a note of the current settings before customizing.

·

When troubleshooting a function, first make sure that the function is set to the default setting.



BSM
Display Description Default Setting ECU
BSM Switches the BSM function on and off. ON ON or OFF Blind Spot Monitor Sensor LH (B)
Brightness Sets the brightness of the indicators in the outer rear view mirror assemblies. Bright Dim or Bright Blind Spot Monitor Sensor LH (B)
Sensitivity Sets the notification timing for vehicles approaching from behind the vehicle. Middle Early, Middle, Late or Only Blind Spot Blind Spot Monitor Sensor LH (B)

RCTA
Display Measurement Item Default Setting ECU
RCTA Switches the RCTA function on and off. ON ON or OFF Blind Spot Monitor Sensor LH (B)
Volume Sets the volume of the RCTA buzzer (No. 2 clearance warning buzzer) 2 1, 2 or 3 Blind Spot Monitor Sensor LH (B)