RM38N0EC _59 Vehicle Exterior _111849 EXTERIOR PANELS / TRIM _0500106 REAR DOOR OUTSIDE MOULDING A

EXTERIOR PANELS / TRIM  REAR DOOR OUTSIDE MOULDING  REASSEMBLY  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH side and LH side.

·

The following procedure is for the LH side.



PROCEDURE

Hide 75797C 1.INSTALL REAR DOOR UPPER OUTSIDE MOULDING PAD

HINT:

When installing the rear door upper outside moulding pad, heat the rear door lower outside moulding using a heat light.


Heating Temperature:
Item Temperature
Rear Door Lower Outside Moulding 20 to 30 °C (68 to 86 °F)


CAUTION:
E306500C23
2.365,2 2.698,2 false 0.5,2.333 0.5,2.667 true 0.427,2.708 0.74,2.865 0.313,0.156 10 false *a 2.76,1.927 3.073,2.083 0.313,0.156 10 false *b
*a Heated Part
*b Heat Light


·

Do not touch the heat light and heated parts, touching the heat light may result in burns.

·

Touching heated parts for a long time may result in burns.



NOTICE:

Do not heat the rear door lower outside moulding excessively.


a.

Clean the rear door lower outside moulding.

i.

Using a heat light, heat the rear door lower outside moulding surface.


ii.

Remove any remaining double-sided tape from the rear door lower outside moulding.


iii.

Wipe off any tape adhesive residue with cleaner.



b.

Using a brush or felt, apply primer or equivalent to the rear door upper outside moulding pad installation area.

NOTICE:
·

Use a clean brush or felt.

·

Do not touch the rear door lower outside moulding until the primer has dried.




c.

Install a new rear door upper outside moulding pad.

i.

Using a heat light, heat the rear door lower outside moulding surface.


ii.

Remove the release paper from the rear door upper outside moulding pad.

HINT:

After removing the release paper, keep the exposed adhesive free from foreign matter.



iii.

Install the rear door upper outside moulding pad as shown in the illustration.

B589312
1.438,0.813 1.146,0.49 true 6.344,0.688 6.208,0.438 true 0.813,0.677 1.01,0.469 true 5.802,0.76 6.073,0.458 true 1.031,0.104 1.188,0.302 0.156,0.198 10 false A 6.094,0.094 6.25,0.292 0.156,0.198 10 false B 1.396,0.781 1.635,0.948 0.24,0.167 10 true *a 5.656,0.76 5.875,0.938 0.219,0.177 10 true *a 0.677,0.677 0.875,0.844 0.198,0.167 10 true *a 6.26,0.688 6.479,0.865 0.219,0.177 10 true *a
*a Line - -


Standard Measurement:
Area Measurement Area Measurement
A 3 mm (0.118 in.) B 3 mm (0.118 in.)


HINT:

Press the rear door upper outside moulding pad firmly to install it.