Use the same procedure for the RH side and LH side.
The following procedure is for the LH side.
68104
1.INSTALL REAR DOOR GLASS SUB-ASSEMBLY
2.INSTALL HOLE PLUG
68124B
3.INSTALL REAR DOOR QUARTER WINDOW GLASS
67408E
4.INSTALL REAR DOOR WINDOW DIVISION BAR SUB-ASSEMBLY
68152C
5.INSTALL REAR DOOR GLASS RUN
75740
6.INSTALL REAR DOOR BELT MOULDING ASSEMBLY
|
Install in this Direction |
Engage the 7 claws to install a new rear door belt moulding assembly as shown in the illustration.
67842E
7.INSTALL REAR DOOR SERVICE HOLE COVER
68199
8.INSTALL REAR DOOR REAR BELT SEAL
68174A
9.INSTALL REAR DOOR INNER GLASS WEATHERSTRIP
67604
10.INSTALL REAR DOOR TRIM BOARD SUB-ASSEMBLY
74222C
11.INSTALL REAR DOOR ARMREST COVER
69278C
12.INSTALL REAR DOOR INSIDE HANDLE BEZEL
13.CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL
for A25F-FXS, A25D-FXS:
for M20D-FKS, M20C-FKS:
65351A
14.INSTALL BATTERY HOLE COVER (for HV Model)
58416K
15.INSTALL REAR NO. 2 FLOOR BOARD (for HV Model)
16.PERFORM INITIALIZATION AFTER RECONNECTING AUXILIARY BATTERY TERMINAL
When disconnecting and reconnecting the battery, there is an automatic learning function that completes learning when the respective system is used.
17.INITIALIZE POWER WINDOW CONTROL SYSTEM
18.INSPECT POWER WINDOW OPERATION