HEATING / AIR CONDITIONING  FRONT EVAPORATOR TEMPERATURE SENSOR  INSTALLATION  

2.323,0.594 2.573,0.375 false 1.833,0.573 1.458,0.229 true 1.927,1.677 1.396,2.948 true 2.094,1.677 1.563,2.948 true 2.604,0.26 2.906,0.448 0.302,0.188 10 false b 1.365,0.115 1.646,0.333 0.281,0.219 10 false a 2,0.083 2.24,0.292 0.24,0.208 10 false X 0.313,1.979 0.573,2.188 0.26,0.208 10 false A 1.583,3.188 1.885,3.396 0.302,0.208 10 false B 1.302,2.948 1.583,3.167 0.281,0.219 10 false *a 1.49,2.958 1.792,3.146 0.302,0.188 10 false *b

*a	Securing Part
*b	Sensor Part

Install the No. 1 cooler thermistor as shown in the illustration.

Installation Position:

Part	Length
A	45 to 55 mm (1.77 to 2.17 in.)
B	61.1 mm (2.41 in.)

NOTICE:

·

Be sure to insert the No. 1 cooler thermistor only once because reinserting it into the same position will not allow it to be firmly secured.

·

When reusing the No. 1 cooler evaporator sub-assembly, insert the No. 1 cooler thermistor one row next to the one that has been used previously (X in the illustration).

·

After inserting the No. 1 cooler thermistor, do not apply excessive force to the wire.

·

Directly insert the No. 1 cooler thermistor until the edge of the plastic case "a" comes into contact with the No. 1 cooler evaporator sub-assembly "b".