REFRIGERANT SHORTAGE CHECK USING GTS
Prepare the vehicle according to the table below.
| Item | Condition |
|---|---|
| Vehicle Condition | Ignition switch ON (Engine running) |
| A/C Switch | On |
| Ambient Temperature*1 | 0 to 49°C (32 to 120°F) |
| Air Conditioning Air Inlet Temperature*2 | 25 to 35°C (77 to 95°F) |
| Set Temperature | MAX COLD |
| Recirculation/fresh Control Switch | Recirculation |
| Air Vent Damper Position | FACE |
| Blower Speed | HI |
*1: This inspection can be judged correctly only if the ambient temperature is within a range of 0 to 49°C (32 to 120°F). Therefore, postpone the test if the temperature is low.
*2: This inspection can be judged correctly only if the air inlet temperature is within a range of 25 to 35°C (77 to 95°F). Therefore, postpone the test if the temperature is out of range.
Using the GTS, check the amount of refrigerant.
| Tester Display |
|---|
| Refrigerant Gas Volume Check |
If the conditions for the inspection are not met, "Refrigerant incorrect" will be displayed on the GTS. Confirm the conditions of the inspection and perform the check again.
If the amount of refrigerant is insufficient, "Refrigerant shortage" is displayed on the GTS and the indicator light on the A/C switch turns off.
When performing this inspection, a DTC will not be output even if "Refrigerant shortage" is displayed on the GTS.
| Result | Amount of Refrigerant | Corrective Action |
|---|---|---|
| Refrigerant shortage | Insufficient | 1.
Check for refrigerant leaks using a halogen leak detector, and repair if necessary. 2.
Evacuate the air conditioning system and charge it with the appropriate volume of new or purified refrigerant. Click here( |
| Refrigerant correct | Correct | - |
| Refrigerant incorrect | Incorrect | Confirm the conditions of the inspection and perform the check again. |
REFRIGERANT PRESSURE HISTORY CLEAR
Press the A/C OFF switch.
According to the GTS display, perform refrigerant pressure history clear.
| Tester Display |
|---|
| Refrigerant Pressure History Clear |
A/C OPERATION LIMIT HISTORY COUNT CLEAR
Press the A/C OFF switch.
According to the GTS display, perform A/C operation limit history count clear.
| Tester Display |
|---|
| A/C Operation Limit History Count Clear |