RM38N0EC
_52
Drivetrain
_111806
K120 / K120F / K121 / K121F CVT
_0499738
OIL PRESSURE SENSOR
A
K120 / K120F / K121 / K121F CVT OIL PRESSURE SENSOR INSTALLATION
PROCEDURE
89637K
1.INSTALL OIL PRESSURE SENSOR
a.
Coat the O-ring of the oil pressure sensor with Toyota Genuine CVT fluid FE.
- NOTICE:
-
If reusing the oil pressure sensor, check that the O-ring is not damaged.
b.
Using a 27 mm deep socket wrench, install the oil pressure sensor to the rear transaxle case sub-assembly.
- Torque:
- 20.6 N*m (210 kgf*cm, 15 ft.*lbf)
- NOTICE:
-
Be careful not to damage the O-ring.
c.
Connect the oil pressure sensor connector.
2.INSPECT FOR FLUID LEAKS