WINDOW / GLASS POWER WINDOW REGULATOR MOTOR(for Rear Door) INSTALLATION
CAUTION / NOTICE / HINT
- HINT:
- ·
Use the same procedure for the RH side and LH side.
·The following procedure is for the LH side.
PROCEDURE
85720E
1.INSTALL POWER WINDOW REGULATOR MOTOR ASSEMBLY
- NOTICE:
-
The regulator arm must be below the intermediate position when installing the power window regulator motor assembly.
Using a T25 "TORX" socket wrench, install the power window regulator motor assembly with the 3 screws.
- Torque:
- 5.4 N*m (55 kgf*cm, 48 in.*lbf)
- HINT:
-
When replacing a power window regulator motor assembly, a new power window regulator motor assembly uses self-tapping screws to thread new installation holes when the self-tapping screws are inserted.
2.INSTALL REAR DOOR WINDOW REGULATOR ASSEMBLY
68104
3.INSTALL REAR DOOR GLASS SUB-ASSEMBLY
4.INSTALL HOLE PLUG
68124B
5.INSTALL REAR DOOR QUARTER WINDOW GLASS
67408E
6.INSTALL REAR DOOR WINDOW DIVISION BAR SUB-ASSEMBLY
68152C
7.INSTALL REAR DOOR GLASS RUN
67842E
8.INSTALL REAR DOOR SERVICE HOLE COVER
68199
9.INSTALL REAR DOOR REAR BELT SEAL
68174A
10.INSTALL REAR DOOR INNER GLASS WEATHERSTRIP
67604
11.INSTALL REAR DOOR TRIM BOARD SUB-ASSEMBLY
74222C
12.INSTALL REAR DOOR ARMREST COVER
69288A
13.INSTALL REAR DOOR INSIDE HANDLE BEZEL
14.CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL
for M20C-FKS, M20D-FKS: Click hereGeneral>MAINTENANCE>M20C-FKS, M20D-FKS BATTERY>INSTALLATION202111,999999,_V1,_112220,_0503321,RM100000001ZE56_01_0015,
for A25D-FXS, A25F-FXS: Click hereGeneral>MAINTENANCE>A25D-FXS, A25F-FXS AUXILIARY BATTERY>INSTALLATION202111,999999,_V1,_112220,_0503322,RM100000001ZE59_01_0015,
65351A
15.INSTALL BATTERY HOLE COVER (for HV Model)
58416K
16.INSTALL REAR NO. 2 FLOOR BOARD (for HV Model)
17. INITIALIZATION AFTER RECONNECTING AUXILIARY BATTERY TERMINAL
- HINT:
-
When disconnecting and reconnecting the battery, there is an automatic learning function that completes learning when the respective system is used.
18.INITIALIZE POWER WINDOW CONTROL SYSTEM
19.INSPECT POWER WINDOW OPERATION