RM38N0EC
_59
Vehicle Exterior
_111844
WINDOW / GLASS
_0499614
FRONT PASSENGER SIDE POWER WINDOW SWITCH
G
WINDOW / GLASS FRONT PASSENGER SIDE POWER WINDOW SWITCH INSPECTION
PROCEDURE
84810
1.INSPECT POWER WINDOW REGULATOR SWITCH ASSEMBLY
a.
0.521,1.927 0.833,2.083
0.313,0.156
10
false
*a
| *a | Component without harness connected
(Power Window Regulator Switch Assembly) |
Check the switch function.
i.
Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection Condition Specified Condition 5 - 7 Auto up or manual up position Below 100 Ω 4 - 7 Auto down or manual down position Below 100 Ω 8 - 7 Auto up or auto down position Below 100 Ω 5 - 7 Off 10 kΩ or higher 4 - 7 Off 10 kΩ or higher 8 - 7 Off 10 kΩ or higher
If the result is not as specified, replace the power window regulator switch assembly.
b.
Check that the LED illuminates.
i.
Apply auxiliary battery voltage to the power window regulator switch assembly and check that the LED illuminates.
- OK:
Battery Connection Specified Condition Auxiliary battery positive (+) → 3
Auxiliary battery negative (-) → 1LED illuminates
If the result is not as specified, replace the power window regulator switch assembly.