RM36D0EC _56 Audio / Visual / Telematics _083082 PARK ASSIST / MONITORING _0711992 BLIND SPOT MONITOR SYSTEM C

PARK ASSIST / MONITORING  BLIND SPOT MONITOR SYSTEM  C1AB704  Rear Side Radar Sensor (Module "A") System Internal Failure  


DESCRIPTION

This DTC is stored when the blind spot monitor sensor RH (A) detects an internal malfunction.

DTC No. Detection Item DTC Detection Condition Trouble Area
C1AB704 Rear Side Radar Sensor (Module "A") System Internal Failure The blind spot monitor sensor RH (A) detects an internal malfunction Blind spot monitor sensor RH (A)

CAUTION / NOTICE / HINT

NOTICE:

When checking for DTCs, make sure that the blind spot monitor system is turned on.


PROCEDURE

1.CHECK DTC
a.

Clear the DTCs.

Click hereAudio / Visual / Telematics>PARK ASSIST / MONITORING>BLIND SPOT MONITOR SYSTEM>DTC CHECK / CLEAR

Body Electrical > Blind Spot Monitor "A" > Clear DTCs
50002 461

b.

Recheck for DTCs and check if the same DTC is output again.

Click hereAudio / Visual / Telematics>PARK ASSIST / MONITORING>BLIND SPOT MONITOR SYSTEM>DTC CHECK / CLEAR

Body Electrical > Blind Spot Monitor "A" > Trouble Codes
50001 461
OK:

No DTCs are output.



Result:
Proceed to
OK
NG



OK

USE SIMULATION METHOD TO CHECK

Click hereGeneral>INTRODUCTION>HOW TO TROUBLESHOOT ECU CONTROLLED SYSTEMS>HOW TO PROCEED WITH TROUBLESHOOTING


NG

REPLACE BLIND SPOT MONITOR SENSOR RH (A)

Click hereAudio / Visual / Telematics>PARK ASSIST / MONITORING>BLIND SPOT MONITOR SENSOR>REMOVAL