CUSTOMIZE BLIND SPOT MONITOR SYSTEM
Customizing with the GTS
When the customer requests a change in a function, first make sure that the function can be customized.
Be sure to make a note of the current settings before customizing.
When troubleshooting a function, first make sure that the function is set to the default setting.
| Tester Display | Description | Default | Setting | ECU |
|---|---|---|---|---|
| BSM Function | Switches the blind spot monitor function on and off. | Valid | $00:Valid,$01:Invalid | Blind Spot Monitor Sensor LH (B) |
| RCTA Function | Switches the RCTA function on and off. | Valid | $00:Valid,$01:Invalid | Blind Spot Monitor Sensor LH (B) |
Customizing with the multi-information display
When the customer requests a change in a function, first make sure that the function can be customized.
Be sure to make a note of the current settings before customizing.
When troubleshooting a function, first make sure that the function is set to the default setting.
Select the setting by referring to the table below.
| Display | Description | Default | Setting | ECU |
|---|---|---|---|---|
| Brightness | Sets the brightness of the indicators in the outer rear view mirror assemblies. | Bright | Dim or Bright | Blind Spot Monitor Sensor LH (B) |
| Display | Description | Default | Setting | ECU |
|---|---|---|---|---|
| Buzzer Volume | Sets the No. 1 clearance warning buzzer volume. | 2 | 1, 2, or 3 | Clearance warning ECU assembly |