CHECK FOR DTC
Turn the ignition switch to ON.
Using the GTS, check for DTCs.
If a malfunction is found, repair it, and then check for DTCs again to make sure that no DTCs are output.
CHECK TIME STAMP
By checking Time Stamp, the time and order in which DTCs were stored in an ECU can be checked.
Using the GTS, perform Health Check.
Select the systems for which to perform Health Check and check for time stamp data.
Powertrain
Chassis
Body
Store All Data
Select "Yes" when "Would you like to include Time Stamp Data?" is displayed.
If "Yes" is not selected, time stamp data will not be stored.
After Health Check has completed, select "Time Stamp Data" to display the Time Stamp screen.
Select the desired system from the drop-down list on the bottom of the Time Stamp screen.
Check the order and time which DTCs were stored for the selected system.
CLEAR DTC
Turn the ignition switch to ON.
Using the GTS, clear the DTCs.
When the DTCs are cleared, freeze frame data is cleared at the same time.
DTCs may not be cleared if the malfunction continues.
Turn the ignition switch off.