RM36D0EC _58 Vehicle Interior _083100 SUPPLEMENTAL RESTRAINT SYSTEMS _0400500 CENTER AIRBAG SENSOR ASSEMBLY A

SUPPLEMENTAL RESTRAINT SYSTEMS CENTER AIRBAG SENSOR ASSEMBLY INSTALLATION

CAUTION / NOTICE / HINT

NOTICE:: ·

After replacing the airbag ECU assembly, make sure to perform ECU configuration.

·

After performing the update ECU security key procedure, make sure to perform the initialization procedure for when the cable has been disconnected and reconnected to the negative (-) auxiliary battery terminal.

PROCEDURE

Hide Display 89170A 1.INSTALL AIRBAG ECU ASSEMBLY

a.

Check that the ignition switch is off.

b.

Check that the cable is disconnected from the negative (-) auxiliary battery terminal.

CAUTION:: ·

Wait at least 60 seconds after disconnecting the cable from the negative (-) auxiliary battery terminal to disable the SRS system.

·

If the airbag deploys for any reason, it may cause a serious accident.

c.

B555735

Install the airbag ECU assembly with the 3 bolts.

Torque:: 17.5 N*m (178 kgf*cm, 13 ft.*lbf)

NOTICE:: ·

If the airbag ECU assembly has been dropped, or there are any cracks, dents or other defects in the case or connector, replace the airbag ECU assembly with a new one.

·

When installing the airbag ECU assembly, be careful that the SRS wiring does not interfere with or is not pinched between other parts.

·

When the ignition switch is first turned to ON after the airbag ECU assembly has been replaced, make sure that no one is in the vehicle.

d.

B556697C01

1.333,1.281 1.667,1.615 true 1.688,1.323 2.021,1.656 true 2.063,1.375 2.396,1.708 true 2.354,1.708 2.531,1.896 0.177,0.188 10 true *a 1.969,1.646 2.146,1.833 0.177,0.188 10 true *a 1.615,1.604 1.792,1.792 0.177,0.188 10 true *a

*a

Push in

Connect the 3 connectors and push in the lock lever to lock the connector.

NOTICE:: When connecting any airbag connector, take care not to damage the airbag wire harness.

e.

Check that there is no looseness in the installation parts of the airbag ECU assembly.

Hide Display 58861B 2.INSTALL NO. 1 CONSOLE BOX DUCT

Click hereVehicle Interior>HEATING / AIR CONDITIONING>AIR CONDITIONING UNIT (for A25B-FXS)>INSTALLATION202409,999999,_58,_083104,_0403064,RM100000002NFZC_03_0012,

Hide Display 58810J 3.INSTALL CONSOLE BOX ASSEMBLY

Click hereVehicle Interior>INTERIOR PANELS / TRIM>FRONT CONSOLE BOX>INSTALLATION202304,999999,_58,_083106,_0400608,RM1000000029Q1L,

Hide Display 4.CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

·

for M20C-FKS:

Click hereGeneral>MAINTENANCE>M20C-FKS BATTERY>INSTALLATION202304,999999,_V1,_083136,_0418197,RM100000002A9BV,

·

for M20D-FKS:

Click hereGeneral>MAINTENANCE>M20D-FKS BATTERY>INSTALLATION202304,999999,_V1,_083136,_0403617,RM100000002A9CC,

·

for A25B-FXS:

Click hereGeneral>MAINTENANCE>A25B-FXS AUXILIARY BATTERY>INSTALLATION202304,999999,_V1,_083136,_0403618,RM100000002A9CD,

·

for A25D-FXS:

Click hereGeneral>MAINTENANCE>A25D-FXS AUXILIARY BATTERY>INSTALLATION202304,999999,_V1,_083136,_0477834,RM100000002A9D9,

·

for A25F-FXS:

Click hereGeneral>MAINTENANCE>A25F-FXS AUXILIARY BATTERY (Production date from 2021/08)>INSTALLATION202304,999999,_V1,_083136,_0486275,RM100000002A9DH,

Hide Display 5. WRITE VIN/VEHICLE IDENTIFICATION NUMBER

NOTICE:: If the airbag ECU assembly has been replaced, write VIN/vehicle identification number.; Click hereVehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>AIRBAG SYSTEM (for GTMC Made)>UTILITY202405,999999,_58,_083100,_0694959,RM100000002LV18,

Hide Display 6. UPDATE ECU SECURITY KEY

Click hereGeneral>SETUP>WHEN REPLACING OR REMOVING/INSTALLING PARTS>UPDATE ECU SECURITY KEY202405,999999,_V1,_083041,_0402305,RM100000002ISNL,

Hide Display 7. ECU CONFIGURATION

NOTICE:: If the airbag ECU assembly has been replaced, perform ECU configuration.; Click hereGeneral>SETUP>WHEN REPLACING OR REMOVING/INSTALLING PARTS>ECU CONFIGURATION202405,999999,_V1,_083041,_0402305,RM100000002M670,

Hide Display 8. INITIALIZATION AFTER RECONNECTING AUXILIARY BATTERY TERMINAL

HINT:: When disconnecting and reconnecting the auxiliary battery, there is an automatic learning function that completes learning when the respective system is used.; Click hereGeneral>SETUP>WHEN DISCONNECTING OR RECONNECTING BATTERY TERMINAL>AUTOMATIC LEARNING CHART202409,999999,_V1,_083041,_0402304,RM100000002NY03,

Hide Display 9. PERFORM DIAGNOSTIC SYSTEM CHECK

·

for GTMC Made:

Click hereVehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>AIRBAG SYSTEM (for GTMC Made)>DTC CHECK / CLEAR202405,999999,_58,_083100,_0694959,RM100000002LV1B,

·

for SFTM Made:

Click hereVehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>AIRBAG SYSTEM (for SFTM Made)>DTC CHECK / CLEAR202409,999999,_58,_083100,_0694957,RM100000002NSO1,

Hide Display 10.CHECK SRS WARNING LIGHT

·

for GTMC Made:

Click hereVehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>AIRBAG SYSTEM (for GTMC Made)>OPERATION CHECK202405,999999,_58,_083100,_0694959,RM100000002LV17,

·

for SFTM Made:

Click hereVehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>AIRBAG SYSTEM (for SFTM Made)>OPERATION CHECK202409,999999,_58,_083100,_0694957,RM100000002NSNY,

Hide Display 11. PERFORM YAW RATE AND ACCELERATION SENSOR ZERO POINT CALIBRATION

·

for HV Model:

Click hereBrake>BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS>ELECTRONICALLY CONTROLLED BRAKE SYSTEM (for HV Model)>UTILITY202304,999999,_54,_083077,_0401811,RM1000000029TH7,

·

for Gasoline Model:

Click hereBrake>BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS>ELECTRONICALLY CONTROLLED BRAKE SYSTEM (for Gasoline Model)>UTILITY202304,999999,_54,_083077,_0402316,RM100000002AG8P,

·

for GF1A:

Click hereDrivetrain>GF1A (TRANSFER / 4WD / AWD)>DYNAMIC TORQUE CONTROL AWD SYSTEM>CALIBRATION202409,999999,_52,_083067,_0401881,RM100000002NJ1J,

·

for GF2A:

Click hereDrivetrain>GF2A (TRANSFER / 4WD / AWD)>DYNAMIC TORQUE VECTORING AWD SYSTEM>CALIBRATION201910,999999,_52,_083068,_0401882,RM100000001JEAV,